From: Matt Corallo <bitcoin-list@bluematt•me>
To: Mike Hearn <mike@plan99•net>
Cc: Bitcoin Dev <bitcoin-development@lists•sourceforge.net>
Subject: Re: [Bitcoin-development] Near-term scalability
Date: Fri, 15 Jun 2012 15:08:55 +0200 [thread overview]
Message-ID: <1339765735.31489.40.camel@bmthinkpad> (raw)
In-Reply-To: <CANEZrP3w+AiTXmv9Wb3Zi5yyFmGPk82-ysVo4_DVvtg8HHBCdQ@mail.gmail.com>
On Fri, 2012-06-15 at 13:29 +0200, Mike Hearn wrote:
> I had to hit the sack last night as it was 2am CET, but I'd like to
> sum up the discussion we had on IRC about scalability and SatoshiDice
> in particular.
>
> I think we all agreed on the following:
>
> - Having senders/buyers pay no fees is psychologically desirable even
> though we all understand that eventually, somebody, somewhere will be
> paying fees to use Bitcoin
>
> - In the ideal world Bitcoin would scale perfectly and there would be
> no need for there to be some "winners" and some "losers" when it comes
> to confirmation time.
>
> There was discussion of some one-off changes to address the current
> situation, namely de-ranking transactions that re-use addresses. Gavin
> and myself were not keen on this idea, primarily because it just
> avoids the real problem and Bitcoin already has a good way to
> prioritize transactions via the fees mechanism itself. The real issue
> is that SatoshiDice does indeed pay fees and generates a lot of
> transactions, pushing more traditional traffic out due to artificial
> throttles.
The idea can be more generalized in that there are many cases where the
generator of a transaction doesn't care about confirmation times, and
would really be willing to make their transaction lower priority than
other 0-fee transactions. This enables the first point with lower
confirmation times for a while longer.
As it turns out, we already have an indication that someone is willing
to wait longer for confirmations - rapid reuse of an address.
1) Green Addresses: The whole point of a green address is that you are
trusted based on your address, not necessarily based on confirmations of
your transactions. In this case, you are generally willing to wait a
bit longer for confirmations than the average user depositing coins into
their Mt. Gox account.
2) Donation Addresses: If you are using a publicized donation address,
you probably aren't depending on getting your coins *now* to turn around
and ship a product and, again, you are a bit more willing to tolerate
longer confirmation times.
3) Lazy (or overworked) coders: If, for whatever reason, someone
designing a bitcoin site decides that it is simply easier to make users
pay to a single address for everything, such actions should generally be
discouraged. Such a setup is worse for end-user privacy. Also, such
laziness (or likely just overworked and not having time to fix the
issue) is likely also laziness across the board including ignoring
multisend for payouts. If you discourage such address use forcing site
designers to implement more sane policies, hopefully they will do enough
research to also do multisend. Note that though this is where one
addresses sites like SatoshiDice, its also the one where we are likely
to have the least impact...
One of the ways to implement such deprioritization of rapidly-reused
addresses is to limit the count of address re-uses by default in memory
pool. By limiting relaying of such transactions, you a) give nodes
across the network some small say in the transactions which they have to
deal with relaying outside of blocks, instead of relying on miners to
make decisions which are good for the total network load, but which are
worse for them. b) You allow sites which wish to re-use addresses to do
so initially to keep the time-to-launch the same as it is today, but
force them to re-think their design decisions as they grow to
(hopefully) decrease their impact on the average Bitcoin full-node
operator. Sites which begin to see their transactions rate-limited have
several options:
1) Make a deal with a miner to feed them their list of now-non-relayed
transactions outside of the regular p2p network and have them manually
added to blocks. Id argue that such setups are going to become more
common in the future and such out-of-band transaction relaying should be
encouraged. This also shifts the delay for other transactions from a
constant delay getting into blocks until there is room for additional
0-fee transactions to a spike on each block from the given miner. I
highly prefer this, as you would see usually only one or two block delay
getting your transaction confirmed at the worst case, instead of a very
fuzzy unknown delay that could stretch on for some time.
2) Use rotating addresses. This is likely the simplest to implement,
and I would absolutely think this is what most sites would end up doing.
Though it doesn't result in a decreased load on the transaction-relaying
nodes, it does at least allow for a minor improvement in user privacy.
In the end, it boils down to an optional transaction deprioritization.
>
> The following set of proposals were discussed:
>
> (1) Change the mining code to group transactions together with their
> mempool dependencies and then calculate all fees as a group. A tx with
> a fee of 1 BTC that depends on 5 txns with zero fees would result in
> all 6 transactions being considered to have a fee of 1BTC and
> therefore become prioritized for inclusion. This allows a transition
> to "receiver pays" model for fees. There are many advantages. One is
> that it actually makes sense ... it's always the receiver who wants
> confirmations because it's the receiver that fears double spends.
> Senders never do. What's more, whilst Bitcoin is designed to operate
> on a zero-trust model in the real world trust often exists and it can
> be used to optimize by passing groups of transactions around with
> their dependencies, until that group passes a trust boundary and gets
> broadcast with a send-to-self tx to add fees. Another advantage is it
> simplifies usage for end users who primarily buy rather than sell,
> because it avoids the need to guess at fees, one of the most
> problematic parts of Bitcoins design now.
>
> The disadvantages are that it can result in extra transactions that
> exist only for adding fees, and it requires a more modern payment
> protocol than the direct-IP protocol Satoshi designed.
>
> It would help address the current situation by avoiding angry users
> who want to buy things, but don't know what fee to set and so their
> transactions get stuck.
>
> (2) SatoshiDice should use the same fee algorithms as Bitcoin-Qt to
> avoid paying excessive fees and queue-jumping. Guess that's on my
> plate.
>
> (3) Scalability improvements seem like a no brainer to everyone, it's
> just a case of how complicated they are.
I think all of the above are largely no brianers to everyone.
>
> (4) Making the block size limit float is better than picking a new
> arbitrary threshold.
Definitely something that is very appealing as we need to scale up.
>
> On the forums Matt stated that block chain pruning was a no-go because
> "it makes bitcoin more centralized". I think we've thrashed this one
> out sufficiently well by now that there should be a united opinion on
> it. There are technical ways to implement it such that there is no
> change of trust requirements. All the other issues (finding archival
> nodes, etc) can be again addressed with sufficient programming.
My point was that the easiest way to do it would be to ship a pruned
snapshot with Bitcoin, and such a system, while verifiable, would
increase Bitocin's centralization. Though it is quite possible to prune
the chain while downloading at checkpoints or when blocks are N deep, it
complicates the initial download if no one has the chain to begin with.
Another point I made was that by doing chain pruning by default, we may
see a decrease in non-fClient nodes (for compatibility, I would assume
pruned nodes have to set fClient) which is what old clients look for to
connect to, possibly complicating using Bitcoin for clients that either
wish to run a full IBD or older clients which need a non-fClient node
before they are happy (which could be an issue when you look at the very
poor "upgrade-apathy" in the Bitcoin community with people running
long-outdated versions because they don't feel like upgrading).
All that said, I do believe pruning will eventually have to come to
encourage p2pool and other getmemorypool-based pool mining, but
(obviously) its something that needs careful consideration in its
overall effects across the network before its applied.
>
> For the case of huge blocks slowing down end user syncing and wasting
> their resources, SPV clients like MultiBit and Android Wallet already
> exist and will get better with time. If Jeff implements the bloom
> filtering p2p commands I'll make bitcoinj use them and that'll knock
> out excessive bandwidth usage and parse overheads from end users who
> are on these clients. At some point Bitcoin-Qt can have a dual mode,
> but who knows when that'll get implemented.
>
> Does that all sound reasonable?
next prev parent reply other threads:[~2012-06-15 13:24 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-15 11:29 Mike Hearn
2012-06-15 13:08 ` Matt Corallo [this message]
2012-06-15 13:34 ` Mike Hearn
2012-06-15 16:18 ` Matt Corallo
[not found] ` <CAAS2fgTJ0UH0Gr6gVMNZwOiv41WzZVesyvNCULj8UfCPPGxQrw@mail.gmail.com>
2012-06-15 16:53 ` Gregory Maxwell
2012-06-15 16:56 ` Stefan Thomas
2012-06-15 17:37 ` Mike Koss
2012-06-15 18:38 ` Amir Taaki
[not found] ` <CAAS2fgSVbYFkkhP_0Ny5ULB-DJKN-3hZLkqWukrGL80-UenMwQ@mail.gmail.com>
2012-06-15 18:50 ` Amir Taaki
2012-06-15 18:55 ` Gregory Maxwell
2012-06-15 20:56 ` Gavin Andresen
2012-06-16 7:55 ` Mike Hearn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1339765735.31489.40.camel@bmthinkpad \
--to=bitcoin-list@bluematt$(echo .)me \
--cc=bitcoin-development@lists$(echo .)sourceforge.net \
--cc=mike@plan99$(echo .)net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox