From: Peter Todd <pete@petertodd•org>
To: Bram Cohen <bram@bittorrent•com>
Cc: Bitcoin Protocol Discussion <bitcoin-dev@lists•linuxfoundation.org>
Subject: Re: [bitcoin-dev] Merkle trees and mountain ranges
Date: Sat, 18 Jun 2016 19:01:43 -0400 [thread overview]
Message-ID: <20160618230143.GA25017@fedora-21-dvm> (raw)
In-Reply-To: <CA+KqGkpRmeKyo6TFpe+uUCdJSina+ARraNd0dkHSb2Hpx5dYuw@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 10002 bytes --]
On Fri, Jun 17, 2016 at 07:43:47PM -0700, Bram Cohen wrote:
> On Thu, Jun 16, 2016 at 9:34 PM, Peter Todd <pete@petertodd•org> wrote:
>
> > So above you said that in merbinner trees each node "hash[es] in a record
> > of
> > its depth" That's actually incorrect: each node commits to the prefix that
> > all
> > keys below that level start with, not just the depth.
>
>
> I considered a similar trick at the implementation rather than the
> definition level: A node doesn't have to store the prefix which is implicit
> in its position. That would create a fair number of headaches though,
> because I'm using fixed size stuff in important ways, and it could at most
> save about 10% of memory, so it goes into the 'maybe later' bucket.
Wait, are you saying you think committing to the prefix is a "trick"? It's just
a very simple - and possibly not-optimal - way of committing to what data
should be accessible under a given node. An alternative would have been ensure
that in terms of _cryptographic_ tree position.
By "position", are you talking about position within RAM? That may or may not
be a viable optimization, but it's quite separate from the question of the
cryptographic structure of the data.
> > This means that in merbinner trees, cases where multiple keys share parts
> > of
> > the same prefix are handled efficiently, without introducing extra levels
> > unnecessarily; there's no need for the ONLY0/1 nodes as the children of an
> > inner node will always be on different sides.
> >
> > When keys are randomly distributed, this isn't a big deal; OTOH against
> > attackers who are choosing keys, e.g. by grinding hashes, merbinner trees
> > always have maximum depths in proportion to log2(n) of the actual number of
> > items in the tree. Grinding is particularly annoying to deal with due to
> > the
> > birthday attack: creating a ground prefix 64 bits long only takes 32 bits
> > worth
> > of work.
> >
>
> Yes an attacker can force the tree to be deeper in places, but it's
> mitigated in several ways: (1) The way I'm using memory it won't cause a
> whole new block to be allocated, it will just force log(attack strength) -
> log(n) nodes to be used (2) logarithmic growth being what it is that isn't
> such a big amount (3) With the special casing of TERMBOTH an attacker needs
> three things with the same prefix to pull off an attack rather than two,
> which is quite a bit harder to pull off.
> That said, it wouldn't be all that hard to change how the hashing function
> works to do a single hash for a whole series of ONLY in a row instead of a
> new one at every level, which would make the attacker only able to force
> extra memory usage instead of extra CPU, but this is a slightly annoying
> thing to write to stop a fairly lame attack, so I'm at least not doing it
> for my initial implementation. I could likely be convinced that it's worth
> doing before an actual release though. There's another implementation trick
> to do the same thing for memory usage, which is much more in the 'do later'
> category because it doesn't involve changing the format and hence it can be
> put off.
>
>
> > In particular, case #2 handles your leaf node optimizations generically,
> > without special cases and additional complexity. It'd also be a better way
> > to
> > do the ONLY0/1 cases, as if the "nothing on this side" symbol is a single
> > byte,
> > each additional colliding level would simply extend the commitment without
> > hashing. In short, you'd have nearly the same level of optimization even
> > if at
> > the cryptography level your tree consists of only leaves, inner nodes, and
> > nil.
> >
>
> I'm taking pains to make all the hashing be of fixed-size things, so that a
> non-padding variant of a secure hashing algorithm can be used. The chains
> of ONLY thing above would force a special exception to that, which can be
> done but is annoying. Making things smaller than a single block (64 bytes)
> won't speed up hashing time, and making things a single byte longer than
> that doubles it.
Have you seen how BLAKE2 omits padding when the data to be hashed happens to be
exactly one block in size? It's significantly faster than SHA256, and that's a
standard part of the algorithm already.
> > > > Technically even a patricia trie utxo commitment can have sub-1 cache
> > > > > misses per update if some of the updates in a single block are close
> > to
> > > > > each other in memory. I think I can get practical Bitcoin updates
> > down
> > > > to a
> > > > > little bit less than one l2 cache miss per update, but not a lot
> > less.
> > > >
> > > > I'm very confused as to why you think that's possible. When you say
> > > > "practical
> > > > Bitcoin updates", what exactly is the data structure you're proposing
> > to
> > > > update? How is it indexed?
> >
>
> I'll re-answer this because I did a terrible job before. The entire data
> structure consists of nodes which contain a metadata byte (TERM0, ONLY1,
> etc.) followed by fixes size secure hashes, and (in some cases) pointers to
> where the children are. The secure hashes in parent nodes are found by
> hashing their children verbatim (or the stored string in the case of a
> TERM). This is very conventional. All of the cleverness is in where in
> memory these nodes are stored so that tracing down the tree causes very few
> cache misses.
>
> (The alternate approach is to have each node store its own hash rather than
> that be stored by the parent. That approach means that when you're
> recalculating you have to look up siblings which doubles the number of
> cache misses. Not such a hot idea.)
Have you benchmarked the cost of a hash operation vs. the cost of a cache miss?
What are the actual numbers?
> At the root there's a branch block. It consists of all nodes up to some
> fixed depth - let's say 12 - with that depth set so that it roughly fits
> within a single memory page. Branch blocks are arranged with the nodes in
> fixed position defined by the prefix they correspond to, and the terminals
> have outpointers to other blocks. Because they're all clustered together, a
> lookup or update will only require a single
A single....?
> Below the root block are other branch blocks. Each of them has a fixed 12
> bit prefix it is responsible for. When doing a lookup a second cache miss
> will be hit for levels 13-24, because those are all clustered in the same
> branch block.
So, is this also how the data structure looks cryptographically, or is the way
it's hashed separate from the above description?
> Below the second level of root block (at Bitcoin utxo set scale - this
> varies based on how much is stored) there are leaf blocks. A leaf block
> consists of nodes with outpointers to its own children which must be within
> the same leaf block. All entry points into a leaf block are from the same
> branch block, and the leaf block has no out pointers to other blocks. When
> a leaf block overflows the entry point into it which overflowed is moved
> into the active leaf for that branch, and if that's full a new one is
> allocated. There's some subtlety to exactly how this is done, but I've
> gotten everything down to simple expedient tricks with straightforward
> implementations. The thing which matters for now is that there's only a
> single cache miss for each leaf node, because they also fit in a page.
Page as in 4096 bytes? But L1/L2/L3 cache is arranged in terms of 64 byte cache
lines - where do pages come in here?
At Bitcoin UTXO set scale, how large do you think these data structures are?
> So at Bitcoin scale there will probably only be 3 cache misses for a
> lookup, and that's a worst case scenario. The first one is probably always
> warm, bringing it down to 2, and if you do a bunch in sorted order they'll
> probably hit the same second level branches repeatedly bringing it down to
> 1, and might even average less than that if there are enough that the leaf
> block has multiple things being accessed.
"Sorted order" - what exact type of sorting do you mean here?
> > Anyway hashing is pretty slow. The very fast BLAKE2 is about 3 cycles/byte
> > (SHA256 is about 15 cycles/byte) so hashing that same data would take
> > around
> > 200 cycles, and probably quite a bit more in practice due to overheads
> > from our
> > short message lengths; fetching a cache line from DRAM only takes about
> > 1,000
> > cycles. I'd guess that once other overheads are taken into account, even
> > if you
> > could eliminate L2/L3 cache-misses it wouldn't be much of an improvement.
> >
>
> Those numbers actually back up my claims about performance. If you're doing
> a single update and recalculating the root afterwards, then the amount of
> rehashing to be done is about 30 levels deep times 64 bytes per thing
> hashed times 15 cycles per byte then it's about 28,800 cycles of hashing.
> If you have a naive radix tree implementation which hits a cache miss at
> every level then that's 30,000 cycles, which is about half the performance
> time, certainly worth optimizing. If instead of sha256 you use blake2
> (Which sounds like a very good idea!) then hashing for an update will be
> about 5760 cycles and performance will be completely dominated by cache
> misses. If a more cache coherent implementation is used, then the cost of
> cache misses will be 3000 cycles, which will be a non-factor with sha256
> and a significant but not dominating one with blake2.
But that's assuming the dataset in question fits in cache; I don't see how it
does. Since it doesn't, I'm argung the total % improvement by _any_ cache
optimization on the subset that does fit in cache will be relatively small.
Again, how large a dataset do you think you're working with here?
--
https://petertodd.org 'peter'[:-1]@petertodd.org
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 455 bytes --]
next prev parent reply other threads:[~2016-06-18 23:01 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-15 0:14 Bram Cohen
2016-06-16 0:10 ` Peter Todd
2016-06-16 1:16 ` Bram Cohen
2016-06-16 3:26 ` Peter Todd
2016-06-16 9:07 ` Bram Cohen
2016-06-17 4:34 ` Peter Todd
2016-06-18 2:43 ` Bram Cohen
2016-06-18 23:01 ` Peter Todd [this message]
2016-07-15 23:00 ` Bram Cohen
2016-06-18 3:22 ` Bram Cohen
2016-06-18 22:09 ` Peter Todd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160618230143.GA25017@fedora-21-dvm \
--to=pete@petertodd$(echo .)org \
--cc=bitcoin-dev@lists$(echo .)linuxfoundation.org \
--cc=bram@bittorrent$(echo .)com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox