* [bitcoin-dev] Custom signet for testing full RBF
@ 2022-11-20 6:36 alicexbt
2022-11-22 11:20 ` Michael Folkson
0 siblings, 1 reply; 3+ messages in thread
From: alicexbt @ 2022-11-20 6:36 UTC (permalink / raw)
To: Bitcoin Protocol Discussion
Hi Bitcoin Developers,
I have setup a [custom signet][0] for testing full RBF. You can connect to one or more of these nodes using `addnode`:
13.115.34.55 (issuer, full-rbf)
kfupbqwb2yvzzqjomfq5pkem553a6uzp2k73seqn4d46smy7azua.b32.i2p (rbf-optin)
luvczzzppiqnc2b7poivkxlugafe3uqaj245ebjqxtceio7poaorqcyd.onion (full-rbf)
Example config:
```
signet=1
signetchallenge=5121035daaa313aada6310340a242af17238cc1fd8849e875940bce65a60ac7e0e0ff751ae
proxy=127.0.0.1:9050
[signet]
addnode=luvczzzppiqnc2b7poivkxlugafe3uqaj245ebjqxtceio7poaorqcyd.onion
mempoolfullrbf=1
```
Example for a simple test case:
- Run 2 nodes
- Connect node 1 with i2p node and use default opt-in rbf
- Connect node 2 with node 1 and onion node. This node should use `mempoolfullrbf=1` in config and compile bitcoind using PR [#26454][1] branch
- Broadcast Tx1 using node 2 and replace with Tx2 using `bumpfee` RPC
It will be fun to test with more nodes joining this custom signet. If anyone interested to test, please post your bitcoin address in [full-rbf room][2]. We can even setup an explorer if this experiment makes sense.
[0]: https://en.bitcoin.it/wiki/Signet#Custom_Signet
[1]: https://github.com/bitcoin/bitcoin/pull/26454
[2]: #full-rbf:matrix.org
Sent with Proton Mail secure email.
/dev/fd0
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [bitcoin-dev] Custom signet for testing full RBF
2022-11-20 6:36 [bitcoin-dev] Custom signet for testing full RBF alicexbt
@ 2022-11-22 11:20 ` Michael Folkson
2022-11-22 17:09 ` alicexbt
0 siblings, 1 reply; 3+ messages in thread
From: Michael Folkson @ 2022-11-22 11:20 UTC (permalink / raw)
To: alicexbt, Bitcoin Protocol Discussion
Hi alicexbt
Thanks for setting this up. Generally it seems to me like an excellent idea to set up custom signets (and/or get proposals enabled on the default signet) for testing and experimenting with new proposals.
I have two questions.
1) In this particular case the -mempoolfullrbf configuration option is in the recent Bitcoin Core 24.0 release and so can be used both on mainnet and the default signet, testnet etc. What could be tested on this custom signet that can't be tested on the default signet with Bitcoin Core 24.0? Perhaps there are some things that are easier to test with a smaller custom signet network starting from scratch?
2) I know a number of people have struggled (e.g. [0], [1]) to get a custom signet set up. I think the CTV signet took a while to get set up too. It seems you followed the instructions on the Bitcoin wiki [2] for setting this one up? Was there anything you found difficult or was counterintuitive getting this custom signet set up? You are the sole block signer on this custom signet. How regularly are you mining blocks (e.g. strictly every 10 minutes, replicating the Poisson process on mainnet, adhoc etc?) Are you running this custom signet node on the same machine as a default signet, mainnet, testnet full node? I'm a little tentative to start joining custom signet networks on the same machine that is already running other nodes but perhaps there are no problems.
I'm not sure yet if I have a use case in mind for this particular custom signet but I'm very interested in custom signet setup generally and the docs/resources to make this as easy as possible so thanks again for posting about this.
Thanks
Michael
[0]: https://bitcoin.stackexchange.com/questions/114477/could-someone-share-with-me-some-documentations-or-sites-on-how-to-set-up-a-cust
[1]: https://bitcoin.stackexchange.com/questions/114724/peer-discovery-on-a-custom-signet-custom-signetchallenge
[2]: [0]: https://en.bitcoin.it/wiki/Signet#Custom_Signet
--
Michael Folkson
Email: michaelfolkson at protonmail.com
Keybase: michaelfolkson
PGP: 43ED C999 9F85 1D40 EAF4 9835 92D6 0159 214C FEE3
------- Original Message -------
On Sunday, November 20th, 2022 at 08:36, alicexbt via bitcoin-dev <bitcoin-dev@lists•linuxfoundation.org> wrote:
> Hi Bitcoin Developers,
>
> I have setup a [custom signet][0] for testing full RBF. You can connect to one or more of these nodes using `addnode`:
>
> 13.115.34.55 (issuer, full-rbf)
> kfupbqwb2yvzzqjomfq5pkem553a6uzp2k73seqn4d46smy7azua.b32.i2p (rbf-optin)
> luvczzzppiqnc2b7poivkxlugafe3uqaj245ebjqxtceio7poaorqcyd.onion (full-rbf)
>
> Example config:
>
> `signet=1 signetchallenge=5121035daaa313aada6310340a242af17238cc1fd8849e875940bce65a60ac7e0e0ff751ae proxy=127.0.0.1:9050 [signet] addnode=luvczzzppiqnc2b7poivkxlugafe3uqaj245ebjqxtceio7poaorqcyd.onion mempoolfullrbf=1`
>
> Example for a simple test case:
>
> - Run 2 nodes
> - Connect node 1 with i2p node and use default opt-in rbf
> - Connect node 2 with node 1 and onion node. This node should use `mempoolfullrbf=1` in config and compile bitcoind using PR [#26454][1] branch
> - Broadcast Tx1 using node 2 and replace with Tx2 using `bumpfee` RPC
>
> It will be fun to test with more nodes joining this custom signet. If anyone interested to test, please post your bitcoin address in [full-rbf room][2]. We can even setup an explorer if this experiment makes sense.
>
> [0]: https://en.bitcoin.it/wiki/Signet#Custom_Signet
> [1]: https://github.com/bitcoin/bitcoin/pull/26454
> [2]: #full-rbf:matrix.org
>
> Sent with Proton Mail secure email.
>
> /dev/fd0
> _______________________________________________
> bitcoin-dev mailing list
> bitcoin-dev@lists•linuxfoundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/bitcoin-dev
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [bitcoin-dev] Custom signet for testing full RBF
2022-11-22 11:20 ` Michael Folkson
@ 2022-11-22 17:09 ` alicexbt
0 siblings, 0 replies; 3+ messages in thread
From: alicexbt @ 2022-11-22 17:09 UTC (permalink / raw)
To: Michael Folkson; +Cc: Bitcoin Protocol Discussion
Hi Michael,
> In this particular case the -mempoolfullrbf configuration option is in the recent Bitcoin Core 24.0 release and so can be used both on mainnet and the default signet, testnet etc. What could be tested on this custom signet that can't be tested on the default signet with Bitcoin Core 24.0? Perhaps there are some things that are easier to test with a smaller custom signet network starting from scratch?
1. Signet miners and dictators are not interested to use full RBF
2. Testnet is weird and I only use it when a project doesn't support signet
3. Mainnet v24.0 is not released yet although Peter Todd is trying few things, I am not even sure if it will be available, testing should not depend on politics.
4. Main/Default Signet miners and dictators did not respond or agree to use full RBF.
Testing is important and I love it. I do not care about others.
> I know a number of people have struggled (e.g. [0], [1]) to get a custom signet set up. I think the CTV signet took a while to get set up too. It seems you followed the instructions on the Bitcoin wiki [2] for setting this one up? Was there anything you found difficult or was counterintuitive getting this custom signet set up? You are the sole block signer on this custom signet. How regularly are you mining blocks (e.g. strictly every 10 minutes, replicating the Poisson process on mainnet, adhoc etc?) Are you running this custom signet node on the same machine as a default signet, mainnet, testnet full node? I'm a little tentative to start joining custom signet networks on the same machine that is already running other nodes but perhaps there are no problems.
I had no issues except this command:
``
$ ../contrib/signet/miner --cli="./bitcoin-cli" calibrate --grind-cmd="./bitcoin-util grind" --seconds=600
```
I had no clue we need to wait for some seconds/minutes for output. Although its okay.
I used default settings and it should mine with it forever or my AWS subscription is cancelled.
I am trying to help Bitcoin. Although not a big influencer. If most of the developers think its okay to test it directly on mainnet, there is nothing wrong with it. You will get some insights/bugs from this experiment if enough users try it.
Sent with Proton Mail secure email.ichael
/dev/fd0
------- Original Message -------
On Tuesday, November 22nd, 2022 at 4:50 PM, Michael Folkson <michaelfolkson@protonmail•com> wrote:
> Hi alicexbt
>
> Thanks for setting this up. Generally it seems to me like an excellent idea to set up custom signets (and/or get proposals enabled on the default signet) for testing and experimenting with new proposals.
>
> I have two questions.
>
> 1) In this particular case the -mempoolfullrbf configuration option is in the recent Bitcoin Core 24.0 release and so can be used both on mainnet and the default signet, testnet etc. What could be tested on this custom signet that can't be tested on the default signet with Bitcoin Core 24.0? Perhaps there are some things that are easier to test with a smaller custom signet network starting from scratch?
>
> 2) I know a number of people have struggled (e.g. 0, 1) to get a custom signet set up. I think the CTV signet took a while to get set up too. It seems you followed the instructions on the Bitcoin wiki 2 for setting this one up? Was there anything you found difficult or was counterintuitive getting this custom signet set up? You are the sole block signer on this custom signet. How regularly are you mining blocks (e.g. strictly every 10 minutes, replicating the Poisson process on mainnet, adhoc etc?) Are you running this custom signet node on the same machine as a default signet, mainnet, testnet full node? I'm a little tentative to start joining custom signet networks on the same machine that is already running other nodes but perhaps there are no problems.
>
> I'm not sure yet if I have a use case in mind for this particular custom signet but I'm very interested in custom signet setup generally and the docs/resources to make this as easy as possible so thanks again for posting about this.
>
> Thanks
> Michael
>
> 0: https://bitcoin.stackexchange.com/questions/114477/could-someone-share-with-me-some-documentations-or-sites-on-how-to-set-up-a-cust
> 1: https://bitcoin.stackexchange.com/questions/114724/peer-discovery-on-a-custom-signet-custom-signetchallenge
> 2: 0: https://en.bitcoin.it/wiki/Signet#Custom_Signet
>
> --
> Michael Folkson
> Email: michaelfolkson at protonmail.com
> Keybase: michaelfolkson
> PGP: 43ED C999 9F85 1D40 EAF4 9835 92D6 0159 214C FEE3
>
>
> ------- Original Message -------
> On Sunday, November 20th, 2022 at 08:36, alicexbt via bitcoin-dev bitcoin-dev@lists•linuxfoundation.org wrote:
>
>
>
> > Hi Bitcoin Developers,
> >
> > I have setup a custom signet for testing full RBF. You can connect to one or more of these nodes using `addnode`:
> >
> > 13.115.34.55 (issuer, full-rbf)
> > kfupbqwb2yvzzqjomfq5pkem553a6uzp2k73seqn4d46smy7azua.b32.i2p (rbf-optin)
> > luvczzzppiqnc2b7poivkxlugafe3uqaj245ebjqxtceio7poaorqcyd.onion (full-rbf)
> >
> > Example config:
> >
> > `signet=1 signetchallenge=5121035daaa313aada6310340a242af17238cc1fd8849e875940bce65a60ac7e0e0ff751ae proxy=127.0.0.1:9050 [signet] addnode=luvczzzppiqnc2b7poivkxlugafe3uqaj245ebjqxtceio7poaorqcyd.onion mempoolfullrbf=1`
> >
> > Example for a simple test case:
> >
> > - Run 2 nodes
> > - Connect node 1 with i2p node and use default opt-in rbf
> > - Connect node 2 with node 1 and onion node. This node should use `mempoolfullrbf=1` in config and compile bitcoind using PR #26454 branch
> > - Broadcast Tx1 using node 2 and replace with Tx2 using `bumpfee` RPC
> >
> > It will be fun to test with more nodes joining this custom signet. If anyone interested to test, please post your bitcoin address in full-rbf room. We can even setup an explorer if this experiment makes sense.
> >
> > Sent with Proton Mail secure email.
> >
> > /dev/fd0
> > _______________________________________________
> > bitcoin-dev mailing list
> > bitcoin-dev@lists•linuxfoundation.org
> > https://lists.linuxfoundation.org/mailman/listinfo/bitcoin-dev
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2022-11-22 17:09 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-11-20 6:36 [bitcoin-dev] Custom signet for testing full RBF alicexbt
2022-11-22 11:20 ` Michael Folkson
2022-11-22 17:09 ` alicexbt
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox