* [Bitcoin-development] Bitcoin addresses -- opaque or not
@ 2013-06-11 13:11 Melvin Carvalho
2013-06-11 13:44 ` Wladimir
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Melvin Carvalho @ 2013-06-11 13:11 UTC (permalink / raw)
To: Bitcoin Dev
[-- Attachment #1: Type: text/plain, Size: 2321 bytes --]
There was some confusion on IRC as to whether bitcoin addresses are opaque
or not.
https://en.bitcoin.it/wiki/Address
For the sake of argument let's say that opaque means that you can tell
nothing about the address by examining the characters.
My understanding was that they are NOT opaque, and that if that has
changed, it will invalidate much at least some wiki page, for examples at
least some of the following would now be false:
--------
"A Bitcoin address, or simply address, is an identifier of 27-34
alphanumeric characters" -- FALSE
"with the number 1 or 3" -- FALSE
"you can send bitcoins to a person by sending bitcoins to one of their
addresses" -- FALSE
"Addresses are created simply by generating random numbers and then
performing mathematical operations to derive matching pairs of "public" and
"private" keys" -- FALSE
"The probability that a mistyped address is accepted as being valid is 1 in
232, that is, approximately 1 in 4.29 billion" -- FALSE
"If you would like to validate a Bitcoin address in an application, it is
advisable to use a method from this thread rather than to just check for
string length, allowed characters, or that the address starts with a 1 or
3." -- FALSE
"For most properly-generated Bitcoin addresses, there is at least one
secret number known as a private key" -- FALSE
"They consist of random digits and uppercase and lowercase letters, with
the exception that the uppercase letter "O", uppercase letter "I",
lowercase letter "l", and the number "0" are never used to prevent visual
ambiguity" -- FALSE
"Some Bitcoin addresses can be shorter than 34 characters (as few as 27)"
-- FALSE
"Several of the characters inside a Bitcoin address are used as a checksum
so that typographical errors can be automatically found and rejected" --
FALSE
"The checksum also allows Bitcoin software to confirm that a 33-character
(or shorter) address is in fact valid and isn't simply an address with a
missing character" -- FALSE
--------
I also here that there is a LIKELY change from the base58 encoding ... when
was this established?
There's either been some bit changes to the fundamentals of bitcoin here or
there's been some misunderstandings. It would be good to clear things up
as to what exactly an address is now beleived to be, and reflect that in
the wiki.
[-- Attachment #2: Type: text/html, Size: 2756 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [Bitcoin-development] Bitcoin addresses -- opaque or not
2013-06-11 13:11 [Bitcoin-development] Bitcoin addresses -- opaque or not Melvin Carvalho
@ 2013-06-11 13:44 ` Wladimir
2013-06-11 14:12 ` Pieter Wuille
2013-06-11 15:29 ` Luke-Jr
2 siblings, 0 replies; 6+ messages in thread
From: Wladimir @ 2013-06-11 13:44 UTC (permalink / raw)
To: Melvin Carvalho; +Cc: Bitcoin Dev
[-- Attachment #1: Type: text/plain, Size: 1224 bytes --]
On Tue, Jun 11, 2013 at 3:11 PM, Melvin Carvalho
<melvincarvalho@gmail•com>wrote:
> There was some confusion on IRC as to whether bitcoin addresses are opaque
> or not.
>
> https://en.bitcoin.it/wiki/Address
>
> For the sake of argument let's say that opaque means that you can tell
> nothing about the address by examining the characters.
>
> My understanding was that they are NOT opaque, and that if that has
> changed, it will invalidate much at least some wiki page, for examples at
> least some of the following would now be false:
>
How do you define opaque? As far as humans are concerned the addresses are
opaque. They don't tell anything about your country or location, your bank,
your name, they don't even form some kind of hierarchy.
From the viewpoint of the code you could argue they have a meaning "address
type + hashed public key, base58 encoded" thus are not fully opaque. But
it's a long shot, as a hashed value is still very opaque.
> I also here that there is a LIKELY change from the base58 encoding ...
> when was this established?
>
No, there have been no changes to base58. The encoding is still exactly the
same as when Satoshi coined it. Can you show an example of what you mean?
Wladimir
[-- Attachment #2: Type: text/html, Size: 2146 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bitcoin-development] Bitcoin addresses -- opaque or not
2013-06-11 13:11 [Bitcoin-development] Bitcoin addresses -- opaque or not Melvin Carvalho
2013-06-11 13:44 ` Wladimir
@ 2013-06-11 14:12 ` Pieter Wuille
2013-06-11 15:29 ` Luke-Jr
2 siblings, 0 replies; 6+ messages in thread
From: Pieter Wuille @ 2013-06-11 14:12 UTC (permalink / raw)
To: Melvin Carvalho; +Cc: Bitcoin Dev
On Tue, Jun 11, 2013 at 3:11 PM, Melvin Carvalho
<melvincarvalho@gmail•com> wrote:
> There was some confusion on IRC as to whether bitcoin addresses are opaque
> or not.
>
> https://en.bitcoin.it/wiki/Address
>
> For the sake of argument let's say that opaque means that you can tell
> nothing about the address by examining the characters.
>
> My understanding was that they are NOT opaque, and that if that has changed,
> it will invalidate much at least some wiki page, for examples at least some
> of the following would now be false:
I'm afraid this is the result of a misunderstanding.
Yesterday on IRC you were asking why the URI specification doesn't
include the semantics and encoding of addresses. Some people,
including me, argued that addresses should be considered opaque. That
doesn't mean they don't have well-specified definition, only that for
the purposes of URI parsing and handling, code shouldn't know or care
what they represent or how they are formatted. Addresses are specified
in one place, and the URI format simply passes addresses through.
The reason for keeping them independent is that the address format
could change (say, a new type is added, like P2SH (BIP13) before), and
there is no reason why this should break or even concern URI handling
code. Clearly, anything that actually interprets addresses in order to
construct transactions will need changing. It's just two separate
concerns, and they should be dealt with separately.
--
Pieter
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bitcoin-development] Bitcoin addresses -- opaque or not
2013-06-11 13:11 [Bitcoin-development] Bitcoin addresses -- opaque or not Melvin Carvalho
2013-06-11 13:44 ` Wladimir
2013-06-11 14:12 ` Pieter Wuille
@ 2013-06-11 15:29 ` Luke-Jr
2013-06-15 9:50 ` Melvin Carvalho
2013-06-22 11:48 ` Melvin Carvalho
2 siblings, 2 replies; 6+ messages in thread
From: Luke-Jr @ 2013-06-11 15:29 UTC (permalink / raw)
To: bitcoin-development
On Tuesday, June 11, 2013 1:11:33 PM Melvin Carvalho wrote:
> For the sake of argument let's say that opaque means that you can tell
> nothing about the address by examining the characters.
This is true or false based on CONTEXT.
Obviously, an implementation of transaction handling (eg, wallets) needs to be
able to translate addresses to and from what they represent.
On the other hand, things like URI handlers do not (and should not) try to
interpret the address as anything other than an arbitrary word (\w+).
> My understanding was that they are NOT opaque, and that if that has
> changed, it will invalidate much at least some wiki page, for examples at
> least some of the following would now be false:
The wiki goes into much detail on how addresses work, which is not the concern
of most software in the Bitcoin ecosystem, but may be of interest to humans
and developers working on the one component that operates the "black box" that
addresses are.
> --------
> <snip>
> --------
These aren't FALSE, they are "true at the moment, but subject to revision by
newer standards".
> I also here that there is a LIKELY change from the base58 encoding ... when
> was this established?
I stated (on IRC) that it was likely Bitcoin would change from the base58
encoding for addresses ... at some unspecified time in the future, to some
unspecified new encoding that addressed known limitations of base58. What
those changes will be, or when, are not all established at this time. The only
currently-planned change to addresses (very loosely defined) is inclusion of
the Payment Protocol URIs. But the point is that software developers shouldn't
assume that addresses will remain base58 forever.
Luke
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bitcoin-development] Bitcoin addresses -- opaque or not
2013-06-11 15:29 ` Luke-Jr
@ 2013-06-15 9:50 ` Melvin Carvalho
2013-06-22 11:48 ` Melvin Carvalho
1 sibling, 0 replies; 6+ messages in thread
From: Melvin Carvalho @ 2013-06-15 9:50 UTC (permalink / raw)
To: Luke-Jr; +Cc: Bitcoin Dev
[-- Attachment #1: Type: text/plain, Size: 2002 bytes --]
On 11 June 2013 17:29, Luke-Jr <luke@dashjr•org> wrote:
> On Tuesday, June 11, 2013 1:11:33 PM Melvin Carvalho wrote:
> > For the sake of argument let's say that opaque means that you can tell
> > nothing about the address by examining the characters.
>
> This is true or false based on CONTEXT.
>
> Obviously, an implementation of transaction handling (eg, wallets) needs
> to be
> able to translate addresses to and from what they represent.
>
> On the other hand, things like URI handlers do not (and should not) try to
> interpret the address as anything other than an arbitrary word (\w+).
>
I think this statement may need to be justified.
>
> > My understanding was that they are NOT opaque, and that if that has
> > changed, it will invalidate much at least some wiki page, for examples at
> > least some of the following would now be false:
>
> The wiki goes into much detail on how addresses work, which is not the
> concern
> of most software in the Bitcoin ecosystem, but may be of interest to humans
> and developers working on the one component that operates the "black box"
> that
> addresses are.
>
> > --------
> > <snip>
> > --------
>
> These aren't FALSE, they are "true at the moment, but subject to revision
> by
> newer standards".
>
Got it.
>
> > I also here that there is a LIKELY change from the base58 encoding ...
> when
> > was this established?
>
> I stated (on IRC) that it was likely Bitcoin would change from the base58
> encoding for addresses ... at some unspecified time in the future, to some
> unspecified new encoding that addressed known limitations of base58. What
> those changes will be, or when, are not all established at this time. The
> only
> currently-planned change to addresses (very loosely defined) is inclusion
> of
> the Payment Protocol URIs. But the point is that software developers
> shouldn't
> assume that addresses will remain base58 forever.
>
Does this mean that people should not be investing in "vanity addresses"?
>
> Luke
>
[-- Attachment #2: Type: text/html, Size: 3074 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Bitcoin-development] Bitcoin addresses -- opaque or not
2013-06-11 15:29 ` Luke-Jr
2013-06-15 9:50 ` Melvin Carvalho
@ 2013-06-22 11:48 ` Melvin Carvalho
1 sibling, 0 replies; 6+ messages in thread
From: Melvin Carvalho @ 2013-06-22 11:48 UTC (permalink / raw)
To: Luke-Jr; +Cc: Bitcoin Dev
[-- Attachment #1: Type: text/plain, Size: 2514 bytes --]
On 11 June 2013 17:29, Luke-Jr <luke@dashjr•org> wrote:
> On Tuesday, June 11, 2013 1:11:33 PM Melvin Carvalho wrote:
> > For the sake of argument let's say that opaque means that you can tell
> > nothing about the address by examining the characters.
>
> This is true or false based on CONTEXT.
>
> Obviously, an implementation of transaction handling (eg, wallets) needs
> to be
> able to translate addresses to and from what they represent.
>
> On the other hand, things like URI handlers do not (and should not) try to
> interpret the address as anything other than an arbitrary word (\w+).
>
Luke, if you think that the sole purpose of a URI scheme is to be used as a
URI handler, I think you've not fully understood the concept. URIs are the
global variable of the internet, and as such the need to play nicely with
all other URI schemes on the net. They need to be able to be linked to, to
be defined and documented. This is important for bitcoin to get right
because bitcoin: needs to treated in a special way on the internet, I just
saw today that it was treated by some software as a relative URL, which is
going to break a ton of stuff.
>
> > My understanding was that they are NOT opaque, and that if that has
> > changed, it will invalidate much at least some wiki page, for examples at
> > least some of the following would now be false:
>
> The wiki goes into much detail on how addresses work, which is not the
> concern
> of most software in the Bitcoin ecosystem, but may be of interest to humans
> and developers working on the one component that operates the "black box"
> that
> addresses are.
>
> > --------
> > <snip>
> > --------
>
> These aren't FALSE, they are "true at the moment, but subject to revision
> by
> newer standards".
>
> > I also here that there is a LIKELY change from the base58 encoding ...
> when
> > was this established?
>
> I stated (on IRC) that it was likely Bitcoin would change from the base58
> encoding for addresses ... at some unspecified time in the future, to some
> unspecified new encoding that addressed known limitations of base58. What
> those changes will be, or when, are not all established at this time. The
> only
> currently-planned change to addresses (very loosely defined) is inclusion
> of
> the Payment Protocol URIs. But the point is that software developers
> shouldn't
> assume that addresses will remain base58 forever.
>
I am opposed to address changes in general, until he wider implications are
fully understood.
>
> Luke
>
[-- Attachment #2: Type: text/html, Size: 3420 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-06-22 11:48 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-06-11 13:11 [Bitcoin-development] Bitcoin addresses -- opaque or not Melvin Carvalho
2013-06-11 13:44 ` Wladimir
2013-06-11 14:12 ` Pieter Wuille
2013-06-11 15:29 ` Luke-Jr
2013-06-15 9:50 ` Melvin Carvalho
2013-06-22 11:48 ` Melvin Carvalho
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox