Hi everyone,

This post discusses limitations of current Bitcoin Core RBF policy and
attempts to start a conversation about how we can improve it,
summarizing some ideas that have been discussed. Please reply if you
have any new input on issues to be solved and ideas for improvement!

Just in case I've screwed up the text wrapping again, another copy can be
found here: https://gist.github.com/glozow/25d9662c52453bd08b4b4b1d3783b9ff

## Background

Please feel free to skip this section if you are already familiar
with RBF.

Nodes may receive *conflicting* unconfirmed transactions, aka
"double spends" of the same inputs. Instead of always keeping the
first transaction, since v0.12, Bitcoin Core mempool policy has
included a set of Replace-by-Fee (RBF) criteria that allows the second
transaction to replace the first one and any descendants it may have.

Bitcoin Core RBF policy was previously documented as BIP 125.
The current RBF policy is documented [here][1]. In summary:

1. The directly conflicting transactions all signal replaceability
explicitly.

2. The replacement transaction only includes an unconfirmed input if
that input was included in one of the directly conflicting
transactions.

3. The replacement transaction pays an absolute fee of at least the
sum paid by the original transactions.

4. The additional fees pays for the replacement transaction's
bandwidth at or above the rate set by the node's *incremental relay
feerate*.

5. The sum of all directly conflicting transactions' descendant counts
(number of transactions inclusive of itself and its descendants)
does not exceed 100.

We can split these rules into 3 categories/goals:

- **Allow Opting Out**: Some applications/businesses are unable to
handle transactions that are replaceable (e.g. merchants that use
zero-confirmation transactions). We (try to) help these businesses by
honoring BIP125 signaling; we won't replace transactions that have not
opted in.

- **Incentive Compatibility**: Ensure that our RBF policy would not
accept replacement transactions which would decrease fee profits
of a miner. In general, if our mempool policy deviates from what is
economically rational, it's likely that the transactions in our
mempool will not match the ones in miners' mempools, making our
fee estimation, compact block relay, and other mempool-dependent
functions unreliable. Incentive-incompatible policy may also
encourage transaction submission through routes other than the p2p
network, harming censorship-resistance and privacy of Bitcoin payments.

- **DoS Protection**: Limit two types of DoS attacks on the node's
mempool: (1) the number of times a transaction can be replaced and
(2) the volume of transactions that can be evicted during a
replacement.

Even more abstract: our goal is to make a replacement policy that
results in a useful interface for users and safe policy for
node operators.

## Motivation

There are a number of known problems with the current RBF policy.
Many of these shortcomings exist due to mempool limitations at the
time RBF was implemented or result from new types of Bitcoin usage;
they are not criticisms of the original design.

### Pinning Attacks

The most pressing concern is that attackers may take advantage of
limitations in RBF policy to prevent other users' transactions from
being mined or getting accepted as a replacement.

#### SIGHASH_ANYONECANPAY Pinning

BIP125#2 can be bypassed by creating intermediary transactions to be
replaced together. Anyone can simply split a 1-input 1-output
transaction off from the replacement transaction, then broadcast the
transaction as is. This can always be done, and quite cheaply. More
details in [this comment][2].

In general, if a transaction is signed with SIGHASH\_ANYONECANPAY,
anybody can just attach a low feerate parent to this transaction and
lower its ancestor feerate. Even if you require SIGHASH\_ALL which
prevents an attacker from changing any outputs, the input can be a
very low amount (e.g. just above the dust limit) from a low-fee
ancestor and still bring down the ancestor feerate of the transaction.

TLDR: if your transaction is signed with SIGHASH\_ANYONECANPAY and
signals replaceability, regardless of the feerate you broadcast at, an
attacker can lower its mining priority by adding an ancestor.

#### Absolute Fee

The restriction of requiring replacement transactions to increase the
absolute fee of the mempool has been described as "bonkers." If the
original transaction has a very large descendant that pays a large
amount of fees, even if it has a low feerate, the replacement
transaction must now pay those fees in order to meet Rule #3.

#### Package RBF

There are a number of reasons why, in order to enable Package RBF, we
cannot use the same criteria.

For starters, the absolute fee pinning attack is especially
problematic if we apply the same rules (i.e. Rule #3 and #4) in
Package RBF. Imagine that Alice (honest) and Bob (adversary) share a
LN channel. The mempool is rather full, so their pre-negotiated
commitment transactions' feerates would not be considered high
priority by miners. Bob broadcasts his commitment transaction and
attaches a very large child (100KvB with 100,000sat in fees) to his
anchor output. Alice broadcasts her commitment transaction with a
fee-bumping child (200vB with 50,000sat fees which is a generous
250sat/vB), but this does not meet the absolute fee requirement. She
would need to add another 50,000sat to replace Bob's commitment
transaction.

Disallowing new unconfirmed inputs (Rule #2) in Package RBF would be
broken for packages containing transactions already in the mempool,
explained [here][7].

Note: I originally [proposed][6] Package RBF using the same Rule #3
and #4 before I realized how significant this pinning attack is. I'm
retracting that proposal, and a new set of Package RBF rules would
follow from whatever the new individual RBF rules end up being.

#### Same Txid Different Witness

Two transactions with the same non-witness data but different
witnesses have the same txid but different wtxid, and the same fee but
not necessarily the same feerate. Currently, if we see a transaction
that has the same txid as one in the mempool, we reject it as a
duplicate, even if the feerate is much higher. It's unclear to me if
we have a very strong reason to change this, but noting it as a
limitation of our current replacement policy. See [#24007][12].

### User Interface

#### Using Unconfirmed UTXOs to Fund Replacements

The restriction of only allowing confirmed UTXOs for funding a
fee-bump (Rule #2) can hurt users trying to fee-bump their
transactions and complicate wallet implementations. If the original
transaction's output value isn't sufficient to fund a fee-bump and/or
all of the user's other UTXOs are unconfirmed, they might not be able
to fund a replacement transaction. Wallet developers also need to
treat self-owned unconfirmed UTXOs as unusable for fee-bumping, which
adds complexity to wallet logic. For example, see BDK issues [#144][4]
and [#414][5].

#### Interface Not Suitable for Coin Selection

Currently, a user cannot simply create a replacement transaction
targeting a specific feerate or meeting a minimum fee amount and
expect to meet the RBF criteria. The fee amount depends on the size of
the replacement transaction, and feerate is almost irrelevant.

Bitcoin Core's `bumpfee` doesn't use the RBF rules when funding the
replacement. It [estimates][13] a feerate which is "wallet incremental
relay fee" (a conservative overestimation of the node's incremental
relay fee) higher than the original transaction, selects coins for
that feerate, and hopes that it meets the RBF rules. It never fails
Rule #3 and #4 because it uses all original inputs and refuses to
bump a transaction with mempool descendants.

This is suboptimal, but is designed to work with the coin selection
engine: select a feerate first, and then add fees to cover it.
Following the exact RBF rules would require working the other way
around: based on how much fees we've added to the transaction and its
current size, calculate the feerate to see if we meet Rule #4.

While this isn't completely broken, and the user interface is
secondary to the safety of the mempool policy, we can do much better.
A much more user-friendly interface would depend *only* on the
fee and size of the original transactions.

### Updates to Mempool and Mining

Since RBF was first implemented, a number of improvements have been
made to mempool and mining logic. For example, we now use ancestor
feerates in mining (allowing CPFP), and keep track of ancestor
packages in the mempool.

## Ideas for Improvements

### Goals

To summarize, these seem to be desired changes, in order of priority:

1. Remove Rule #3. The replacement should not be *required* to pay
higher absolute fees.

2. Make it impossible for a replacement transaction to have a lower
mining score than the original transaction(s). This would eliminate
the `SIGHASH\_ANYONECANPAY` pinning attack.

3. Remove Rule #2. Adding new unconfirmed inputs should be allowed.

4. Create a more helpful interface that helps wallet fund replacement
transactions that aim for a feerate and fee.

### A Different Model for Fees

For incentive compatibility, I believe there are different
formulations we should consider. Most importantly, if we want to get
rid of the absolute fee rule, we can no longer think of it as "the
transaction needs to pay for its own bandwidth," since we won't always
be getting additional fees. That means we need a new method of
rate-limiting replacements that doesn't require additional fees every
time.

While it makes sense to think about monetary costs when launching a
specific type of attack, given that the fees are paid to the miner and
not to the mempool operators, maybe it doesn't make much sense to
think about "paying for bandwidth". Maybe we should implement
transaction validation rate-limiting differently, e.g. building it
into the P2P layer instead of the mempool policy layer.

Recently, Suhas gave a [formulation][8] for incentive compatibility
that made sense to me: "are the fees expected to be paid in the next
(N?) blocks higher or lower if we process this transaction?"

I started by thinking about this where N=1 or `1 + p`.
Here, a rational miner is looking at what fees they would
collect in the next block, and then some proportion `p` of the rest of
the blocks based on their hashrate. We're assuming `p` isn't *so high*
that they would be okay with lower absolute fees in the next 1 block.
We're also assuming `p` isn't *so low* that the miner doesn't care
about what's left of the mempool after this block.

A tweak to this formulation is "if we process this transaction, would
the fees in the next 1 block higher or lower, and is the feerate
density of the rest of the mempool higher or lower?" This is pretty
similar, where N=1, but we consider the rest of the mempool by feerate
rather than fees.

### Mining Score of a Mempool Transaction

We are often interested in finding out what
the "mining score" of a transaction in the mempool is. That is, when
the transaction is considered in block template building, what is the
feerate it is considered at?

Obviously, it's not the transaction's individual feerate. Bitcoin Core
[mining code sorts][14] transactions by their ancestor feerate and
includes them packages at a time, keeping track of how this affects the
package feerates of remaining transactions in the mempool.

*ancestor feerate*: Ancestor feerate is easily accessible information,
but it's not accurate either, because it doesn't take into account the
fact that subsets of a transaction's ancestor set can be included
without it. For example, ancestors may have high feerates on their own
or we may have [high feerate siblings][8].

TLDR: *Looking at the current ancestor feerate of a transaction is
insufficient to tell us what feerate it will be considered at when
building a block template in the future.*

*min(individual feerate, ancestor feerate)*: Another
heuristic that is simple to calculate based on current mempool tooling
is to use the [minimum of a transaction's individual score and its
ancestor score][10] as a conservative measure. But this can
overestimate as well (see the example below).

*min ancestor feerate(tx + possible ancestor subsets)* We can also
take the minimum of every possible ancestor subset, but this can be
computationally expensive since there can be lots and lots of ancestor
subsets.

*max ancestor feerate(tx + possible descendant subsets)*: Another idea
is to use the [maximum ancestor score of the transaction + each of its
descendants][9]. This doesn't work either; it has the same blindspot
of ancestor subsets being mined on their own.

#### Mining Score Example

Here's an example illustrating why mining score is tricky to
efficiently calculate for mempool transactions:

Let's say you have same-size transactions A (21sat/vB), B (1sat/vB),
C(9sat/vB), D(5sat/vB).
The layout is: grandparent A, parent B, and two children C and D.

```
A
^
B
^ ^
C D
```

A miner using ancestor packages to build block templates will first
include A with a mining score of 21. Next, the miner will include B and
C with a mining score of 6. This leaves D, with a mining score of 5.

Note: in this case, mining by ancestor feerate results in the most
rational decisions, but [a candidate set-based approach][10] which
makes ancestor feerate much less relevant could
be more advantageous in other situations.

Here is a chart showing the "true" mining score alongside the values
calculating using imperfect heuristics described above. All of them
can overestimate or underestimate.

```
A B C D
mining score | 21 | 6 | 6 | 5 |
ancestor feerate | 21 | 11 | 10.3 | 9 |
min(individual, ancestor) | 21 | 1 | 9 | 5 |
min(tx + ancestor subsets) | 21 | 1 | 5 | 3 |
max(tx + descendants subsets) | 21 | 9 | 9 | 5 |

```

Possibly the best solution for finding the "mining score" of a
transaction is to build a block template, see what feerate each
package is included at. Perhaps at some cutoff, remaining mempool
transactions can be estimated using some heuristic that leans
{overestimating, underestimating} depending on the situation.

Mining score seems to be relevant in multiple places: Murch and I
recently [found][3] that it would be very important in
"ancestor-aware" funding of transactions (the wallet doesn't
incorporate ancestor fees when using unconfirmed transactions in coin
selection, which is a bug we want to fix).

In general, it would be nice to know the exact mining priority of
one's unconfirmed transaction is. I can think of a few block/mempool
explorers who might want to display this information for users.

### RBF Improvement Proposals

After speaking to quite a few people, here are some suggestions
for improvements that I have heard:

* The ancestor score of the replacement must be {5, 10, N}% higher
than that of every original transaction.

* The ancestor score of the replacement must be 1sat/vB higher than
that of every original transaction.

* If the original transaction is in the top {0.75MvB, 1MvB} of the
mempool, apply the current rules (absolute fees must increase and
pay for the replacement transaction's new bandwidth). Otherwise, use a
feerate-only rule.

* If fees don't increase, the size of the replacement transaction must
decrease by at least N%.

* Rate-limit how many replacements we allow per prevout.

* Rate-limit transaction validation in general, per peer.

Perhaps some others on the mailing list can chime in to throw other
ideas into the ring and/or combine some of these rules into a sensible
policy.

#### Replace by Feerate Only

I don't think there's going to be a single-line feerate-based
rule that can incorporate everything we need.
On one hand, a feerate-only approach helps eliminate the issues
associated with Rule #3. On the other hand, I believe the main concern
with a feerate-only approach is how to rate limit replacements. We
don't want to enable an attack such as:

1. Attacker broadcasts large, low-feerate transaction, and attaches a
chain of descendants.

2. The attacker replaces the transaction with a smaller but higher
feerate transaction, attaching a new chain of descendants.

3. Repeat 1000 times.

#### Fees in Next Block and Feerate for the Rest of the Mempool

Perhaps we can look at replacements like this:

1. Calculate the directly conflicting transactions and, with their
descendants, the original transactions. Check signaling. Limit the
total volume (e.g. can't be more than 100 total or 1MvB or something).

2. Find which original transactions would be in the next ~1 block. The
replacement must pay at least this amount + X% in absolute fees. This
guarantees that the fees of the next block doesn't decrease.

3. Find which transactions would be left in the mempool after that ~1
block. The replacement's feerate must be Y% higher than the maximum
mining score of these transactions. This guarantees that you now have
only *better* candidates in your after-this-block mempool than you did
before, even if the size and fees the transactions decrease.

4. Now you have two numbers: a minimum absolute fee amount and a
minimum feerate. Check to see if the replacement(s) meet these
minimums. Also, a wallet would be able to ask the node "What fee and
feerate would I need to put on a transaction replacing this?" and use
this information to fund a replacement transaction, without needing to
guess or overshoot.

Obviously, there are some magic numbers missing here. X and Y are
TBD constants to ensure we have some kind of rate limiting for the
number of replacements allowed using some set of fees.

What should they be? We can do some arithmetic to see what happens if
you start with the biggest/lowest feerate transaction and do a bunch
of replacements. Maybe we end up with values that are high enough to
prevent abuse and make sense for applications/users that do RBF.

### Mempool Changes Need for Implementation

As described in the mining score section above,
we may want additional tooling to more accurately assess
the economic gain of replacing transactions in our mempool.

A few options have been discussed:

* Calculate block templates on the fly when we need to consider a
replacement. However, since replacements are [quite common][11]
and the information might be useful for other things as well,
it may be worth it to cache a block template.

* Keep a persistent block template so that we know what transactions
we would put in the next block. We need to remember the feerate
at which each transaction was included in the template, because an
ancestor package may be included in the same block template in
multiple subsets. Transactions included earlier alter the ancestor
feerate of the remaining transactions in the package. We also need
to keep track of the new feerates of transactions left over.

* Divide the mempool into two layers, "high feerate" and "low
feerate." The high feerate layer contains ~1 block of packages with
the highest ancestor feerates, and the low feerate layer contains
everything else. At the edge of a block, we have a Knapsacky problem
where the next highest ancestor feerate package might not fit, so we
would probably want the high feerate layer ~2MvB or something to avoid
underestimating the fees.

## Acknowledgements

Thank you to everyone whose RBF-related suggestions, grievances,
criticisms and ideas were incorporated in this document:
Andrew Chow, Matt Corallo, Suhas Daftuar, Christian Decker,
Mark Erhardt, Lloyd Fournier, Lisa Neigut, John Newbery,
Antoine Poinsot, Antoine Riard, Larry Ruane,

S3RK and Bastien Teinturier.

Thanks for reading!

Best,

Gloria

[14]: https://github.com/bitcoin/bitcoin/blob/cf5bb048e80d4cde8828787b266b7f5f2e3b6d7b/src/node/miner.cpp#L310-L320