From: Billy Tetrud <billy.tetrud@gmail•com>
To: Gloria Zhao <gloriajzhao@gmail•com>,
Bitcoin Protocol Discussion
<bitcoin-dev@lists•linuxfoundation.org>
Cc: Anthony Towns <aj@erisian•com.au>
Subject: Re: [bitcoin-dev] Improving RBF Policy
Date: Sat, 12 Mar 2022 02:18:39 -0600 [thread overview]
Message-ID: <CAGpPWDY8rrUp0CmKm6Bf2dGnj2S8JJjRHD-dhn8LDxidbwV2Ug@mail.gmail.com> (raw)
In-Reply-To: <CAGpPWDY5W8G8je7yQRPF12PtVGeaZ9Pi98LacjrAs+RGEWqv_w@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 17656 bytes --]
In reading through more of the discussion, it seems the idea I presented
above might basically be a reformulation of t-bast's rate-limiting idea
presented in this comment
<https://gist.github.com/glozow/25d9662c52453bd08b4b4b1d3783b9ff?permalink_comment_id=4081349#gistcomment-4081349>.
Perhaps he could comment on whether that characterization is accurate.
On Fri, Mar 11, 2022 at 10:22 AM Billy Tetrud <billy.tetrud@gmail•com>
wrote:
> Hi Gloria,
>
> > 1. Transaction relay rate limiting
>
> I have a similar concern as yours, that this could prevent higher fee-rate
> transactions from being broadcast.
>
> > 2. Staggered broadcast of replacement transactions: within some time
> interval, maybe accept multiple replacements for the same prevout, but only
> relay the original transaction.
>
> By this do you mean basically having a batching window where, on receiving
> a replacement transaction, a node will wait for a period of time,
> potentially receiving many replacements for the same transaction (or many
> separate conflicting transactions), and only broadcasting the "best" one(s)
> at the end of that time window?
>
> Its an interesting idea, but it would produce a problem. Every hop that
> replacement transaction takes would be delayed by this staggered window. If
> the window were 3 minutes and transactions generally take 20 hops to get to
> the majority of miners, a "best-case average" delay might be 3.75 minutes
> (noting that among your 8 nodes, its quite likely one of them would have a
> window ending much sooner than 3 minutes). Some (maybe 3% of) nodes would
> experience delays of more than 20 minutes. That kind of delay isn't great.
>
> However it made me think of another idea: a transaction replacement
> broadcast cooldown. What if nodes kept track of the time they broadcasted
> the last replacement for a package and had a relay cooldown after the last
> replacement was broadcasted? A node receiving a replacement would relay the
> replacement immediately if the package its replacing was broadcasted more
> than X seconds ago, and otherwise it would wait until the time when that
> package was broadcasted at least X seconds ago to broadcast it. Any
> replacements it receives during that waiting period would replace as
> normal, meaning the unrebroadcasted replacement would never be
> broadcasted, and only the highest value replacement would be broadcasted at
> the end of the cooldown.
>
> This wouldn't prevent a higher-fee-rate transaction from being broadcasted
> (like rate limiting could), but would still be effective at limiting
> unnecessary data transmission. Another benefit is that in the
> non-adversarial case, replacement transactions wouldn't be subject to any
> delay at all (while in the staggered broadcast idea, most replacements
> would experience some delay). And in the adversarial case, where a
> malicious actor broadcasts a low-as-possible-value replacement just before
> yours, the worst case delay is just whatever the cooldown period is. I
> would imagine that maybe 1 minute would be a reasonable worst-case delay.
> This would limit spam for a transaction that makes it into a block to ~10x
> (9 to 1). I don't see much of a downside to doing this beyond just the
> slight additional complexity of relay rules (and considering it could save
> substantial additional code complexity, even that is a benefit).
>
> All a node would need to do is keep a timestamp on each transaction they
> receive for when it was broadcasted and check it when a replacement comes
> in. If now-broadcastDate < cooldown, set a timer for cooldown -
> (now-broadcastDate) to broadcast it. If another replacement comes in, clear
> that timer and repeat using the original broadcast date (since the
> unbroadcast transaction doesn't have a broadcast date yet).
>
> I think it might also be useful to note that eliminating "extra data"
> caused by careless or malicious actors (spam or whatever you want to call
> it) should not be the goal. It is impossible to prevent all spam. What we
> should be aiming for is more specific: we should attempt to design a system
> where spam is manageable. Eg if our goal is to ensure that a bitcoin node
> uses no more than 10% of the bandwidth of a "normal" user, if current
> non-spam traffic only requires 1% of a "normal" users's bandwidth, then the
> network can bear a 9 to 1 ratio of spam. When a node spins up, there is a
> lot more data to download and process. So we know that all full nodes can
> handle at least as much traffic as they handle during IBD. What's the
> difference between those amounts? I'm not sure, but I would guess that IBD
> is at least a couple times more demanding than a fully synced node. So I
> might suggest that as long as spam can be kept below a ratio of maybe 2 to
> 1, we should consider the design acceptable (and therefore more complexity
> unnecessary).
>
> The 1 minute broadcast cooldown I mentioned before wouldn't be quite
> sufficient to achieve that ratio. But a 3.33 minute cooldown would be.
> Whether this is "too much" is something that would have to be discussed, I
> suspect a worst-case adversarial 3.33 minute delay would not be "too much".
> Doing this could basically eliminate any risk of actual service denial via
> replacement transactions.
>
> However, I do think that these DOS concerns are quite overblown. I wrote
> up a comment on your rbf-improvements.md
> <https://gist.github.com/glozow/25d9662c52453bd08b4b4b1d3783b9ff?permalink_comment_id=4093100#gistcomment-4093100> detailing
> my thought process on that. The summary is that as long as the fee-rate
> relay rule is maintained, any "spam" is actually paid for, either by the
> "first" transaction in the spam chain, or by the "spam" itself. Even
> without something like a minimum RBF relay delay limiting how much spam
> could be created, the economics of the fee-rate rule already sufficiently
> mitigate the issue of spam.
> On Wed, Mar 9, 2022 at 9:37 AM Gloria Zhao via bitcoin-dev <
> bitcoin-dev@lists•linuxfoundation.org> wrote:
>
>> Hi RBF friends,
>>
>> Posting a summary of RBF discussions at coredev (mostly on transaction
>> relay rate-limiting), user-elected descendant limit as a short term
>> solution to unblock package RBF, and mining score, all open for feedback:
>>
>> One big concept discussed was baking DoS protection into the p2p level
>> rather than policy level. TLDR: The fees are not paid to the node operator,
>> but to the miner. While we can use fees to reason about the cost of an
>> attack, if we're ultimately interested in preventing resource exhaustion,
>> maybe we want to "stop the bleeding" when it happens and bound the amount
>> of resources used in general. There were two main ideas:
>>
>> 1. Transaction relay rate limiting (i.e. the one you proposed above or
>> some variation) with a feerate-based priority queue
>> 2. Staggered broadcast of replacement transactions: within some time
>> interval, maybe accept multiple replacements for the same prevout, but only
>> relay the original transaction.
>>
>> Looking to solicit feedback on these ideas and the concept in general. Is
>> it a good idea (separate from RBF) to add rate-limiting in transaction
>> relay? And is it the right direction to think about RBF DoS protection this
>> way?
>>
>> A lingering concern that I have about this idea is it would then be
>> possible to impact the propagation of another person’s transaction, i.e.,
>> an attacker can censor somebody’s transaction from ever being announced by
>> a node if they send enough transactions to fill up the rate limit.
>> Obviously this would be expensive since they're spending a lot on fees, but
>> I imagine it could be profitable in some situations to spend a few thousand
>> dollars to prevent anyone from hearing about a transaction for a few hours.
>> This might be a non-issue in practice if the rate limit is generous and
>> traffic isn’t horrendous, but is this a problem?
>>
>> And if we don't require an increase in (i.e. addition of "new") absolute
>> fees, users are essentially allowed to “recycle” fees. In the scenario
>> where we prioritize relay based on feerate, users could potentially be
>> placed higher in the queue, ahead of other users’ transactions, multiple
>> times, without ever adding more fees to the transaction. Again, maybe this
>> isn’t a huge deal in practice if we set the parameters right, but it seems…
>> not great, in principle.
>>
>> ---------
>>
>> It's probably also a good idea to point out that there's been some
>> discussion happening on the gist containing my original post on this thread
>> (https://gist.github.com/glozow/25d9662c52453bd08b4b4b1d3783b9ff).
>>
>> Suhas and Matt [proposed][0] adding a policy rule allowing users to
>> specify descendant limits on their transactions. For example, some nth bit
>> of nSequence with nVersion 3 means "this transaction won't have more than X
>> vbytes of descendants" where X = max(1000, vsizeof(tx)) or something. It
>> solves the pinning problem with package RBF where the attacker's package
>> contains a very large and high-fee descendant.
>>
>> We could add this policy and deploy it with package RBF/package relay so
>> that LN can use it by setting the user-elected descendant limit flag on
>> commitment transactions. (Otherwise package RBF is blocked until we find a
>> more comprehensive solution to the pinning attack).
>>
>> It's simple to [implement][1] as a mempool policy, but adds some
>> complexity for wallets that use it, since it limits their use of UTXOs from
>> transactions with this bit set.
>>
>> ---------
>>
>> Also, coming back to the idea of "we can't just use {individual,
>> ancestor} feerate," I'm interested in soliciting feedback on adding a
>> “mining score” calculator. I've implemented one [here][2] which takes the
>> transaction in question, grabs all of the connected mempool transactions
>> (including siblings, coparents, etc., as they wouldn’t be in the ancestor
>> nor descendant sets), and builds a “block template” using our current
>> mining algorithm. The mining score of a transaction is the ancestor feerate
>> at which it is included.
>>
>> This would be helpful for something like ancestor-aware funding and
>> fee-bumping in the wallet: [3], [4]. I think if we did the rate-limited
>> priority queue for transaction relay, we'd want to use something like this
>> as the priority value. And for RBF, we probably want to require that a
>> replacement have a higher mining score than the original transactions. This
>> could be computationally expensive to do all the time; it could be good to
>> cache it but that could make mempool bookkeeping more complicated. Also, if
>> we end up trying to switch to a candidate set-based algorithm for mining,
>> we'd of course need a new calculator.
>>
>> [0]:
>> https://gist.github.com/glozow/25d9662c52453bd08b4b4b1d3783b9ff?permalink_comment_id=4058140#gistcomment-4058140
>> [1]: https://github.com/glozow/bitcoin/tree/2022-02-user-desclimit
>> [2] https://github.com/glozow/bitcoin/tree/2022-02-mining-score
>> [3]: https://github.com/bitcoin/bitcoin/issues/9645
>> [4]: https://github.com/bitcoin/bitcoin/issues/15553
>>
>> Best,
>> Gloria
>>
>> On Tue, Feb 8, 2022 at 4:58 AM Anthony Towns <aj@erisian•com.au> wrote:
>>
>>> On Mon, Feb 07, 2022 at 11:16:26AM +0000, Gloria Zhao wrote:
>>> > @aj:
>>> > > I wonder sometimes if it could be sufficient to just have a relay
>>> rate
>>> > > limit and prioritise by ancestor feerate though. Maybe something
>>> like:
>>> > > - instead of adding txs to each peers setInventoryTxToSend
>>> immediately,
>>> > > set a mempool flag "relayed=false"
>>> > > - on a time delay, add the top N (by fee rate) "relayed=false" txs to
>>> > > each peer's setInventoryTxToSend and mark them as "relayed=true";
>>> > > calculate how much kB those txs were, and do this again after
>>> > > SIZE/RATELIMIT seconds
>>>
>>> > > - don't include "relayed=false" txs when building blocks?
>>>
>>> The "?" was me not being sure that point is a good suggestion...
>>>
>>> Miners might reasonably decide to have no rate limit, and always relay,
>>> and never exclude txs -- but the question then becomes is whether they
>>> hear about the tx at all, so rate limiting behaviour could still be a
>>> potential problem for whoever made the tx.
>>>
>>> > Wow cool! I think outbound tx relay size-based rate-limiting and
>>> > prioritizing tx relay by feerate are great ideas for preventing
>>> spammers
>>> > from wasting bandwidth network-wide. I agree, this would slow the low
>>> > feerate spam down, preventing a huge network-wide bandwidth spike. And
>>> it
>>> > would allow high feerate transactions to propagate as they should,
>>> > regardless of how busy traffic is. Combined with inbound tx request
>>> > rate-limiting, might this be sufficient to prevent DoS regardless of
>>> the
>>> > fee-based replacement policies?
>>>
>>> I think you only want to do outbound rate limits, ie, how often you send
>>> INV, GETDATA and TX messages? Once you receive any of those, I think
>>> you have to immediately process / ignore it, you can't really sensibly
>>> defer it (beyond the existing queues we have that just build up while
>>> we're busy processing other things first)?
>>>
>>> > One point that I'm not 100% clear on: is it ok to prioritize the
>>> > transactions by ancestor feerate in this scheme? As I described in the
>>> > original post, this can be quite different from the actual feerate we
>>> would
>>> > consider a transaction in a block for. The transaction could have a
>>> high
>>> > feerate sibling bumping its ancestor.
>>> > For example, A (1sat/vB) has 2 children: B (49sat/vB) and C (5sat/vB).
>>> If
>>> > we just received C, it would be incorrect to give it a priority equal
>>> to
>>> > its ancestor feerate (3sat/vB) because if we constructed a block
>>> template
>>> > now, B would bump A, and C's new ancestor feerate is 5sat/vB.
>>> > Then, if we imagine that top N is >5sat/vB, we're not relaying C. If we
>>> > also exclude C when building blocks, we're missing out on good fees.
>>>
>>> I think you're right that this would be ugly. It's something of a
>>> special case:
>>>
>>> a) you really care about C getting into the next block; but
>>> b) you're trusting B not being replaced by a higher fee tx that
>>> doesn't have A as a parent; and
>>> c) there's a lot of txs bidding the floor of the next block up to a
>>> level in-between the ancestor fee rate of 3sat/vB and the tx fee
>>> rate of 5sat/vB
>>>
>>> Without (a), maybe you don't care about it getting to a miner quickly.
>>> If your trust in (b) was misplaced, then your tx's effective fee rate
>>> will drop and (because of (c)), you'll lose anyway. And if the spam ends
>>> up outside of (c)'s range, either the rate limiting won't take effect
>>> (spam's too cheap) and you'll be fine, or you'll miss out on the block
>>> anyway (spam's paying more than your tx rate) and you never had any hope
>>> of making it in.
>>>
>>> Note that we already rate limit via INVENTORY_BROADCAST_MAX /
>>> *_INVENTORY_BROADCAST_INTERVAL; which gets to something like 10,500 txs
>>> per 10 minutes for outbound connections. This would be a weight based
>>> rate limit instead-of/in-addition-to that, I guess.
>>>
>>> As far as a non-ugly approach goes, I think you'd have to be smarter
>>> about
>>> tracking the "effective fee rate" than the ancestor fee rate manages;
>>> maybe that's something that could fall out of Murch and Clara's candidate
>>> set blockbuilding ideas [0] ?
>>>
>>> Perhaps that same work would also make it possible to come up with
>>> a better answer to "do I care that this replacement would invalidate
>>> these descendents?"
>>>
>>> [0] https://github.com/Xekyo/blockbuilding
>>>
>>> > > - keep high-feerate evicted txs around for a while in case they get
>>> > > mined by someone else to improve compact block relay, a la the
>>> > > orphan pool?
>>> > Replaced transactions are already added to vExtraTxnForCompact :D
>>>
>>> I guess I was thinking that it's just a 100 tx LRU cache, which might
>>> not be good enough?
>>>
>>> Maybe it would be more on point to have a rate limit apply only to
>>> replacement transactions?
>>>
>>> > For wallets, AJ's "All you need is for there to be *a* path that
>>> follows
>>> > the new relay rules and gets from your node/wallet to perhaps 10% of
>>> > hashpower" makes sense to me (which would be the former).
>>>
>>> Perhaps a corollarly of that is that it's *better* to have the mempool
>>> acceptance rule only consider economic incentives, and have the spam
>>> prevention only be about "shall I tell my peers about this?"
>>>
>>> If you don't have that split; then the anti-spam rules can prevent you
>>> from getting the tx in the mempool at all; whereas if you do have the
>>> split, then even if the bitcoind anti-spam rules are blocking you at
>>> every turn, you can still send your tx to miners by some other route,
>>> and then they can add it to their mempool directly without any hassle.
>>>
>>> Cheers,
>>> aj
>>>
>>> _______________________________________________
>> bitcoin-dev mailing list
>> bitcoin-dev@lists•linuxfoundation.org
>> https://lists.linuxfoundation.org/mailman/listinfo/bitcoin-dev
>>
>
[-- Attachment #2: Type: text/html, Size: 20081 bytes --]
next prev parent reply other threads:[~2022-03-12 8:19 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-27 13:42 Gloria Zhao
2022-01-28 1:35 ` Jeremy
2022-01-30 22:53 ` Antoine Riard
2022-01-31 15:57 ` Bastien TEINTURIER
2022-02-01 1:56 ` Anthony Towns
2022-02-05 13:21 ` Michael Folkson
2022-02-07 10:22 ` Bastien TEINTURIER
2022-02-07 11:16 ` Gloria Zhao
2022-02-08 4:58 ` Anthony Towns
2022-03-09 15:09 ` Gloria Zhao
2022-03-11 16:22 ` Billy Tetrud
2022-03-12 8:18 ` Billy Tetrud [this message]
2022-03-14 10:29 ` Gloria Zhao
2022-03-15 1:43 ` Billy Tetrud
2022-03-17 2:02 ` Antoine Riard
2022-03-17 15:59 ` Billy Tetrud
[not found] <mailman.19693.1643292568.8511.bitcoin-dev@lists.linuxfoundation.org>
2022-01-31 22:54 ` [bitcoin-dev] Improving RBF policy Bram Cohen
2022-02-01 0:08 ` Eric Voskuil
2022-02-01 8:32 ` Bram Cohen
2022-02-01 19:44 ` Eric Voskuil
2022-02-01 0:42 ` Antoine Riard
2022-02-01 2:47 [bitcoin-dev] Improving RBF Policy Prayank
2022-02-01 9:30 ` Bastien TEINTURIER
2022-02-02 10:21 ` Anthony Towns
2022-02-09 17:57 lisa neigut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAGpPWDY8rrUp0CmKm6Bf2dGnj2S8JJjRHD-dhn8LDxidbwV2Ug@mail.gmail.com \
--to=billy.tetrud@gmail$(echo .)com \
--cc=aj@erisian$(echo .)com.au \
--cc=bitcoin-dev@lists$(echo .)linuxfoundation.org \
--cc=gloriajzhao@gmail$(echo .)com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox