public inbox for bitcoindev@googlegroups.com
 help / color / mirror / Atom feed
* [bitcoin-dev] TAPLEAF_UPDATE_VERIFY covenant opcode
@ 2021-09-09  6:41 Anthony Towns
  2021-09-09  6:53 ` Anthony Towns
                   ` (3 more replies)
  0 siblings, 4 replies; 17+ messages in thread
From: Anthony Towns @ 2021-09-09  6:41 UTC (permalink / raw)
  To: bitcoin-dev

Hello world,

A couple of years ago I had a flight of fancy [0] imagining how it
might be possible for everyone on the planet to use bitcoin in a
mostly decentralised/untrusted way, without requiring a block size
increase. It was a bit ridiculous and probably doesn't quite hold up,
and beyond needing all the existing proposals to be implemented (taproot,
ANYPREVOUT, CTV, eltoo, channel factories), it also needed a covenant
opcode [1]. I came up with something that I thought fit well with taproot,
but couldn't quite figure out how to use it for anything other than my
ridiculous scheme, so left it at that.

But recently [2] Greg Maxwell emailed me about his own cool idea for a
covenant opcode, which turned out to basically be a reinvention of the
same idea but with more functionality, a better name and a less fanciful
use case; and with that inspiration, I think I've also now figured out
how to use it for a basic vault, so it seems worth making the idea a
bit more public.

I'll split this into two emails, this one's the handwavy overview,
the followup will go into some of the implementation complexities.



The basic idea is to think about "updating" a utxo by changing the
taproot tree.

As you might recall, a taproot address is made up from an internal public
key (P) and a merkle tree of scripts (S) combined via the formula Q=P+H(P,
S)*G to calculate the scriptPubKey (Q). When spending using a script,
you provide the path to the merkle leaf that has the script you want
to use in the control block. The BIP has an example [3] with 5 scripts
arranged as ((A,B), ((C,D), E)), so if you were spending with E, you'd
reveal a path of two hashes, one for (AB), then one for (CD), then you'd
reveal your script E and satisfy it.

So that makes it relatively easy to imagine creating a new taproot address
based on the input you're spending by doing some or all of the following:

 * Updating the internal public key (ie from P to P' = P + X)
 * Trimming the merkle path (eg, removing CD)
 * Removing the script you're currently executing (ie E)
 * Adding a new step to the end of the merkle path (eg F)

Once you've done those things, you can then calculate the new merkle
root by resolving the updated merkle path (eg, S' = MerkleRootFor(AB,
F, H_TapLeaf(E))), and then calculate a new scriptPubKey based on that
and the updated internal public key (Q' = P' + H(P', S')).

So the idea is to do just that via a new opcode "TAPLEAF_UPDATE_VERIFY"
(TLUV) that takes three inputs: one that specifies how to update the
internal public key (X), one that specifies a new step for the merkle path
(F), and one that specifies whether to remove the current script and/or
how many merkle path steps to remove. The opcode then calculates the
scriptPubKey that matches that, and verifies that the output corresponding
to the current input spends to that scriptPubKey.

That's useless without some way of verifying that the new utxo retains
the bitcoin that was in the old utxo, so also include a new opcode
IN_OUT_AMOUNT that pushes two items onto the stack: the amount from this
input's utxo, and the amount in the corresponding output, and then expect
anyone using TLUV to use maths operators to verify that funds are being
appropriately retained in the updated scriptPubKey.



Here's two examples of how you might use this functionality.

First, a basic vault. The idea is that funds are ultimately protected
by a cold wallet key (COLD) that's inconvenient to access but is as
safe from theft as possible. In order to make day to day transactions
more convenient, a hot wallet key (HOT) is also available, which is
more vulnerable to theft. The vault design thus limits the hot wallet
to withdrawing at most L satoshis every D blocks, so that if funds are
stolen, you lose at most L, and have D blocks to use your cold wallet
key to re-secure the funds and prevent further losses.

To set this up with TLUV, you construct a taproot output with COLD as
the internal public key, and a script that specifies:

 * The tx is signed via HOT
 * <D> CSV -- there's a relative time lock since the last spend
 * If the input amount is less than L + dust threshold, fine, all done,
   the vault can be emptied.
 * Otherwise, the output amount must be at least (the input amount -
   L), and do a TLUV check that the resulting sPK is unchanged

So you can spend up to "L" satoshis via the hot wallet as long as you
wait D blocks since the last spend, and can do whatever you want via a
key path spend with the cold wallet.

You could extend this to have a two phase protocol for spending, where
first you use the hot wallet to say "in D blocks, allow spending up to
L satoshis", and only after that can you use the hot wallet to actually
spend funds. In that case supply a taproot sPK with COLD as the internal
public key and two scripts, the "release" script, which specifies:

 * The tx is signed via HOT
 * Output amount is greater or equal to the input amount.
 * Use TLUV to check:
   + the output sPK has the same internal public key (ie COLD)
   + the merkle path has one element trimmed
   + the current script is included
   + a new step is added that matches either H_LOCKED or H_AVAILABLE as
     described below (depending on whether 0 or 1 was provided as
     witness info)

The other script is either "locked" (which is just "OP_RETURN") or
"available" which specifies:

 * The tx is signed via HOT
 * <D> CSV -- there's a relative time lock since the last spend (ie,
   when the "release" script above was used)
 * If the input amount is less than L, fine, all done, the vault can
   be emptied
 * Otherwise, the output amount must be at least (the input amount minus
   L), and via TLUV, check the resulting sPK keeps the internal pubkey
   unchanged, keeps the merkle path, drops the current script, and adds
   H_LOCKED as the new step.

H_LOCKED and H_AVAILABLE are just the TapLeaf hash corresponding to the
"locked" and "available" scripts.

I believe this latter setup matches the design Bryan Bishop talked about
a couple of years ago [4], with the benefit that it's fully recursive,
allows withdrawals to vary rather than be the fixed amount L (due to not
relying on pre-signed transactions), and generally seems a bit simpler
to work with.



The second scheme is allowing for a utxo to represent a group's pooled
funds. The idea being that as long as everyone's around you can use
the taproot key path to efficiently move money around within the pool,
or use a single transaction and signature for many people in the pool
to make payments. But key path spends only work if everyone's available
to sign -- what happens if someone disappears, or loses access to their
keys, or similar? For that, we want to have script paths to allow other
people to reclaim their funds even if everyone else disappears. So we
setup scripts for each participant, eg for Alice:

 * The tx is signed by Alice
 * The output value must be at least the input value minus Alice's balance
 * Must pass TLUV such that:
   + the internal public key is the old internal pubkey minus Alice's key
   + the currently executing script is dropped from the merkle path
   + no steps are otherwise removed or added

The neat part here is that if you have many participants in the pool,
the pool continues to operate normally even if someone makes use of the
escape hatch -- the remaining participants can still use the key path to
spend efficiently, and they can each unilaterally withdraw their balance
via their own script path. If everyone decides to exit, whoever is last
can spend the remaining balance directly via the key path.

Compared to having on-chain transactions using non-pooled funds, this
is more efficient and private: a single one-in, one-out transaction
suffices for any number of transfers within the pool, and there's no
on-chain information about who was sending/receiving the transfers, or
how large the transfers were; and for transfers out of the pool, there's
no on-chain indication which member of the pool is sending the funds,
and multiple members of the pool can send funds to multiple destinations
with only a single signature. The major constraint is that you need
everyone in the pool to be online in order to sign via the key path,
which provides a practical limit to how many people can reasonably be
included in a pool before there's a breakdown.

Compared to lightning (eg eltoo channel factories with multiple
participants), the drawback is that no transfer is final without an
updated state being committed on chain, however there are also benefits
including that if one member of the pool unilaterally exits, that
doesn't reveal the state of anyone remaining in the pool (eg an eltoo
factory would likely reveal the balances of everyone else's channels at
that point).

A simpler case for something like this might be for funding a joint
venture -- suppose you're joining with some other early bitcoiners to
buy land to build a citadel, so you each put 20 BTC into a pooled utxo,
ready to finalise the land purchase in a few months, but you also want
to make sure you can reclaim the funds if the deal falls through. So
you might include scripts like the above that allow you to reclaim your
balance, but add a CLTV condition preventing anyone from doing that until
the deal's deadline has passed. If the deal goes ahead, you all transfer
the funds to the vendor via the keypath; if it doesn't work out, you
hopefully return your funds via the keypath, but if things turn really
sour, you can still just directly reclaim your 20 BTC yourself via the
script path.



I think a nice thing about this particular approach to recursive covenants
at a conceptual level is that it automatically leaves the key path as an
escape mechanism -- rather than having to build a base case manually,
and have the risk that it might not work because of some bug, locking
your funds into the covenant permanently; the escape path is free, easy,
and also the optimal way of spending things when everything is working
right. (Of course, you could set the internal public key to a NUMS point
and shoot yourself in the foot that way anyway)



I think there's two limitations of this method that are worth pointing out.

First it can't tweak scripts in areas of the merkle tree that it can't
see -- I don't see a way of doing that particularly efficiently, so maybe
it's best just to leave that as something for the people responsible for
the funds to negotiate via the keypath, in which case it's automatically
both private and efficient since all the details stay off-chain, anyway

And second, it doesn't provide a way for utxos to "interact", which is
something that is interesting for automated market makers [5], but perhaps
only interesting for chains aiming to support multiple asset types,
and not bitcoin directly. On the other hand, perhaps combining it with
CTV might be enough to solve that, particularly if the hash passed to
CTV is constructed via script/CAT/etc.



(I think everything described here could be simulated with CAT and
CHECKSIGFROMSTACK (and 64bit maths operators and some way to access
the internal public key), the point of introducing dedicated opcodes
for this functionality rather than (just) having more generic opcodes
would be to make the feature easy to use correctly, and, presuming it
actually has a wide set of use cases, to make it cheap and efficient
both to use in wallets, and for nodes to validate)

Cheers,
aj

[0] https://gist.github.com/ajtowns/dc9a59cf0a200bd1f9e6fb569f76f7a0

[1] Roughly, the idea was that if you have ~9 billion people using
    bitcoin, but can only have ~1000 transactions per block, then you
    need have each utxo represent a significant number of people. That
    means that you need a way of allowing the utxo's to be efficiently
    spent, but need to introduce some level of trust since expecting
    many people to constantly be online seems unreliable, but to remain
    mostly decentralised/untrusted, you want to have some way of limiting
    how much trust you're introducing, and that's where covenants come in.

[2] Recently in covid-adjusted terms, or on the bitcoin consensus
    change scale anyway...
    https://mobile.twitter.com/ajtowns/status/1385091604357124100 

[3] https://github.com/bitcoin/bips/blob/master/bip-0341.mediawiki#Constructing_and_spending_Taproot_outputs 

[4] https://lists.linuxfoundation.org/pipermail/bitcoin-dev/2019-August/017231.html

[5] The idea behind an automated market maker being that you setup a
    script that says "you can withdraw x BTC if you deposit f(x) units of
    USDT, or you can withdraw g(x) units of USDT if you deposit x units
    of BTC", with f(x)/x giving the buy price, and f(x)>g(x) meaning
    you make a profit. Being able to specify a covenant that links the
    change in value to the BTC utxo (+/-x) and the change in value to
    the USDT utxo (+f(x) or -g(x)) is what you'd need to support this
    sort of use case, but TLUV doesn't provide a way to do that linkage.



^ permalink raw reply	[flat|nested] 17+ messages in thread

end of thread, other threads:[~2022-07-08 19:59 UTC | newest]

Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-09-09  6:41 [bitcoin-dev] TAPLEAF_UPDATE_VERIFY covenant opcode Anthony Towns
2021-09-09  6:53 ` Anthony Towns
2021-09-09 12:56   ` darosior
2021-09-09 15:54   ` Jeremy
2021-09-09 19:26   ` Jeremy
2021-09-10  7:42     ` Anthony Towns
2022-07-08 19:52   ` Tim Ruffing
2021-09-09  9:16 ` Matt Corallo
2021-09-10  4:12 ` Antoine Riard
2021-09-11  3:26   ` Anthony Towns
2021-09-12 23:37     ` Antoine Riard
2021-09-15  6:50       ` Anthony Towns
2021-09-18 14:11         ` Antoine Riard
2021-09-20 14:52           ` Anthony Towns
2021-09-22  1:40             ` Antoine Riard
2021-09-23  0:29 ` Olaoluwa Osuntokun
2021-10-29 15:47   ` Billy Tetrud

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox