public inbox for bitcoindev@googlegroups.com
 help / color / mirror / Atom feed
From: James MacWhyte <macwhyte@gmail•com>
To: Billy Tetrud <billy.tetrud@gmail•com>,
	 Bitcoin Protocol Discussion
	<bitcoin-dev@lists•linuxfoundation.org>
Subject: Re: [bitcoin-dev] OP_BEFOREBLOCKVERIFY - discussing and opcode that invalidates a spend path after a certain block
Date: Fri, 11 Jun 2021 13:12:16 +0200	[thread overview]
Message-ID: <CAH+Axy7b8MS92ZeMnPx-TosvNzRv9=34UDQ9ia-fxeLzO_A0+Q@mail.gmail.com> (raw)
In-Reply-To: <CAGpPWDZLzV0EghpeL1Hw-_5kToU_-Vzzco5DuxnivKEAS51NHg@mail.gmail.com>

[-- Attachment #1: Type: text/plain, Size: 12310 bytes --]

@Billy I like the idea. It is very obvious how useful an opcode like this
would be! (My background is in wallet implementation)

@Russell I do understand your concerns of monotonism, however I'm having a
hard time really coming up with an attack vector. You said "one can design
a wallet to passively take advantage of reorgs by always spending through
an OP_BBV that is on the verge of becoming invalid." Unless I'm mistaken,
this means you would need to send yourself a fresh transaction using OP_BBV
set to, say, 2 blocks in the future, then immediately spend that output in
a new payment to someone else and hope a reorg happens. Does this mean the
theoretical double-spend wallet you are proposing would have to send two
transactions every time you make a single payment, doubling the transaction
fees and adding more uncertainty around when the second transaction would
get confirmed?

In a normal double spend scenario, there is no cost to a failed attempt,
but much to gain from a success. With your design, there is a real cost to
every single attempt (transaction fees) and no evidence that the rate of
success would be higher (you still have to bet on the reorg not including
your transaction in the first few blocks). It sounds like this new system
would actually be less attractive to double spenders than the current model!

I also agree with Billy's idea for relay rules. We already have abusable
chain rules (e.g. a tx can be included in a block with 0 transaction fee
[spam?]) but we add protection with relay rules (e.g. minimum fee to
relay). I don't see how this would be any different, if the chain rules
only enforced the block height for confirmation and the relay rules forced
a minimum OP_BBV value in order to protect against reorg double spends.

James


On Fri, Jun 11, 2021 at 11:00 AM Billy Tetrud via bitcoin-dev <
bitcoin-dev@lists•linuxfoundation.org> wrote:

> >  one can design a wallet to passively take advantage of reorgs
>
> It does sound like this is the central issue. I can certainly see that
> it's materially different than current double spending ability. Double
> spending via reorgs today requires either active participation and
> above-average connection to miners or luck.
>
> The easiest method of double spending I can think of is the following.
> Consider if a user broadcasts an RBF transaction as soon as the original
> transaction is mined. I assume the transaction won't propagate through the
> network because any node that has received the newest block will see it as
> an invalid transaction, is that right? Is there no significant possibility
> that enough of the network hasn't seen the block yet to transmit the RBF
> transaction widely enough to get incorporated into a reorg? This would
> certainly be something wallets could do automatically. It certainly does
> seem like at very least this would have a much lower success rate than your
> auto-double-spend wallet.
>
> In any case, what if we apply the same logic to non-monotonic
> transactions? What if we program nodes to reject such transactions that are
> too close to the borderline? For example, if nodes rejected transactions
> that could expire within 100 blocks, it would be much less likely for this
> kind of thing to be done at point of sale, and there would be a much higher
> chance that whatever recipient that's willing to wait 100 blocks would be
> willing to wait 6 blocks more to be sure no reorg happens. It would also be
> a lot more likely that the transaction is confirmed well before it might
> expire. Not a perfect solution, to be sure. But it could substantially
> limit the cases and likelihoods that passive double-spend attempts would
> succeed. But miners could still get and include transactions in blocks
> regardless of this, and they have an incentive to (to maximize the fees
> they collect). It at least seems plausible that those incentives would
> undermine this solution.
>
> But it seems like all this is only a problem for people who are
> considering 1 confirmation to be effectively finalized. Users and
> programmatic systems alike simply wait for some condition to be true to
> recognize payment as having completed. Systems could simply be programmed
> so the condition is at least 6 confirmations for any non-monotonic
> transaction, or all transactions. 6 confirmations is the accepted standard
> of finalization, isn't it? Users looking at their software should be able
> to see that a confirmation has happened but that this isn't enough to be
> considered finalized. As long as this is standard, no problem should really
> exist, right? Except within incorrectly written software or people taking
> it upon themselves to define finalization on their own. People who accept
> 0-conf transactions are similarly using a non-standard definition of
> finalization and are putting themselves at even greater risk for double
> spends. How would this be any different?
>
> >  there is little point in addressing these lesser concerns if the main
> concern is outstanding
>
> I agree, it makes the most sense to discuss the above points rather than
> getting into the weeds about more minor issues.
>
> On Thu, Jun 10, 2021 at 4:20 PM Russell O'Connor <roconnor@blockstream•com>
> wrote:
>
>> As it stands today, in order to double spend a transaction during a
>> reorg, one must take an active role of recognizing that a reorg has
>> happened, hope that the new branch has completely omitted your spending
>> transaction, and then quickly broadcast a replacement transaction with a
>> higher fee to outbid your previous transaction.
>>
>> However with, pretty much any change to Bitcoin that leads to
>> non-monotonic validity rules, that is any rule where transactions that are
>> valid at one tip, can become invalid at a latter tip through some other
>> means than their inputs being spent, such as OP_BBV, one can design a
>> wallet to passively take advantage of reorgs by always spending through an
>> OP_BBV that is on the verge of becoming invalid.  Then you just have to sit
>> back and wait for a suitable reorg to take back your UTXO for you without
>> any work.  I would probably attempt to build such a wallet for myself
>> should any OP_BBV-like proposal be implemented.  Think of it as an
>> auto-double spend wallet.
>>
>> Some people hold the opinion that there is no meaningful distinction
>> between the active and passive roles in these two scenarios.  I'm not
>> convinced.  I see a material difference between needing to actively
>> broadcast a replacement transaction and passively waiting for your
>> transaction to fall out of validity.  I also see a material difference
>> between needing the transaction to be completely omitted from the reorging
>> chain versus just having the transaction fail a height qualification in the
>> reorging chain.
>>
>> (There are a few other lesser problems with an OP_BBV proposal, including
>> the fact that Bitcoin software tends to cache script validity so you'd want
>> to use the taproot annex instead of pure script; and a possible issue that
>> the proposal defeats limits on transaction replacement because now instead
>> of meeting minimum thresholds for fee bumping you can just let the previous
>> transaction expire and bump the fee by a fraction (though you are
>> effectively rate limited so maybe that is considered sufficiently
>> mitigated?).  But there is little point in addressing these lesser concerns
>> if the main concern is outstanding.)
>>
>> On Thu, Jun 10, 2021 at 6:20 PM Billy Tetrud <billy.tetrud@gmail•com>
>> wrote:
>>
>>> @Russell In that thread, you quoted Satoshi there, but neither he nor
>>> you really deeply explained the concern. Would you mind elaborating on a
>>> situation that calls for concern here? Some deeper explanation of the
>>> "reorg safety" property would also be helpful. I'd very much like to know
>>> what your thoughts are on the specific points I brought up in the BIP as
>>> well.
>>>
>>> On Thu, Jun 10, 2021 at 11:35 AM Russell O'Connor <
>>> roconnor@blockstream•com> wrote:
>>>
>>>> This is a continuation of the thread at
>>>> https://lists.linuxfoundation.org/pipermail/bitcoin-dev/2021-April/018760.html
>>>> on this topic.
>>>>
>>>> I still remain unconvinced that we ought to give up on the "reorg
>>>> safety" property that is explicitly part of Bitcoin's design.
>>>>
>>>> On Thu, Jun 10, 2021 at 1:56 PM Billy Tetrud via bitcoin-dev <
>>>> bitcoin-dev@lists•linuxfoundation.org> wrote:
>>>>
>>>>> Hi Everyone,
>>>>>
>>>>> I'd like to open a discussion of an opcode I call OP_BEFOREBLOCKVERIFY
>>>>> (OP_BBV) which is similar to ones that have been discussed before (eg
>>>>> OP_BLOCKNUMBER). The opcode is very simple: the it takes as a
>>>>> parameter a number representing a block height, and marks the transaction
>>>>> invalid if the current block the transaction is being evaluated for is
>>>>> greater than or equal to that block height, the transaction is invalid. I
>>>>> wrote up a bip for OP_BBV here
>>>>> <https://github.com/fresheneesz/bip-efficient-bitcoin-vaults/blob/main/bbv/bip-beforeblockverify.md>
>>>>> .
>>>>>
>>>>> The motivation for this opcode is primarily to do switch-off kinds of
>>>>> transactions. Eg, an output that contains both a spend path that uses
>>>>> OP_BBV and a spend path that uses OP_CHECKSEQUENCEVERIFY so that before a
>>>>> particular block one person can spend, and after that block a different
>>>>> person can spend. This can allow doing things like expiring payments or
>>>>> reversible payments in a cheaper way. Currently, things like that require a
>>>>> sequence of multiple transactions, however OP_BBV can do it in a single
>>>>> transaction, making these applications a lot more economically feasible.
>>>>>
>>>>> The particular application I'm most interested in is more efficient
>>>>> wallet vaults. However, wallet vaults requires other new opcodes, and I've
>>>>> been given the (good, I think) advice to start off this discussion with
>>>>> something a bit more bite sized and manageable. So I want to keep this
>>>>> discussion to OP_BBV and steer away from the specifics of the wallet vaults
>>>>> I'm thinking of (which are more involved, requiring other new opcodes that
>>>>> I think makes more sense to discuss in a different thread).
>>>>>
>>>>> The main thing I'd like to discuss is the historical avoidance of and
>>>>> stigma toward opcodes that can cause a valid transaction to become invalid.
>>>>>
>>>>> It seems there are two concerns:
>>>>>
>>>>> 1. that an opcode like might create a DOS vector where a malicious
>>>>> actor might be able to spam the mempool with transactions containing this
>>>>> opcode.
>>>>> 2. that an opcode like this could cause "bad" reorg behavior, where in
>>>>> a reorg, transactions that were spent become not spend and not spendable
>>>>> because they were mined too near their expiry point.
>>>>>
>>>>> While I don't want to claim anything about opcodes that can cause
>>>>> spend paths to expire in general, I do want to claim that *some* opcodes
>>>>> like that are safe - in particular OP_BBV. In the context of OP_BBV
>>>>> specifically, it seems to me like item 1 (mempool handling) is a solvable
>>>>> problem and that point 2 (reorg issues) is not really a problem since
>>>>> people should generally be waiting for 6 confirmations and software can
>>>>> warn the user to wait for 6 confirmations in relevant scenarios where a
>>>>> 6-block reorg might reverse the transaction. I discuss this in detail in
>>>>> the Design Tradeoffs and Risks
>>>>> <https://github.com/fresheneesz/bip-efficient-bitcoin-vaults/blob/main/bbv/bip-beforeblockverify.md#transaction-expiry> section
>>>>> of the document I wrote for OP_BBV. I'd love to hear thoughts from others
>>>>> on here about these things and especially the discussion of these issues in
>>>>> the document I linked to.
>>>>>
>>>>> Thanks,
>>>>> BT
>>>>>
>>>>> _______________________________________________
>>>>> bitcoin-dev mailing list
>>>>> bitcoin-dev@lists•linuxfoundation.org
>>>>> https://lists.linuxfoundation.org/mailman/listinfo/bitcoin-dev
>>>>>
>>>> _______________________________________________
> bitcoin-dev mailing list
> bitcoin-dev@lists•linuxfoundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/bitcoin-dev
>

[-- Attachment #2: Type: text/html, Size: 14772 bytes --]

  reply	other threads:[~2021-06-11 11:12 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-10 17:35 Billy Tetrud
2021-06-10 18:35 ` Russell O'Connor
2021-06-10 22:19   ` Billy Tetrud
2021-06-10 23:20     ` Russell O'Connor
2021-06-11  5:59       ` Billy Tetrud
2021-06-11 11:12         ` James MacWhyte [this message]
2021-06-11 11:43           ` Russell O'Connor
2021-06-12  7:59             ` Billy Tetrud
2021-06-12 15:58               ` Russell O'Connor
2021-06-12 18:48                 ` Billy Tetrud
2021-06-13 22:12                   ` Billy Tetrud

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAH+Axy7b8MS92ZeMnPx-TosvNzRv9=34UDQ9ia-fxeLzO_A0+Q@mail.gmail.com' \
    --to=macwhyte@gmail$(echo .)com \
    --cc=billy.tetrud@gmail$(echo .)com \
    --cc=bitcoin-dev@lists$(echo .)linuxfoundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox