public inbox for bitcoindev@googlegroups.com
 help / color / mirror / Atom feed
From: Craig Raw <craigraw@gmail•com>
To: Bitcoin Protocol Discussion <bitcoin-dev@lists•linuxfoundation.org>
Subject: [bitcoin-dev] BIP Proposal: Wallet Labels Export Format
Date: Wed, 24 Aug 2022 11:18:43 +0200	[thread overview]
Message-ID: <CAPR5oBNKQEPCAXcMoneGv2vLVmOLZGyxNEoZ4_=tyQT_mkAkmw@mail.gmail.com> (raw)

[-- Attachment #1: Type: text/plain, Size: 5969 bytes --]

Hi all,

I would like to propose a BIP that specifies a format for the export and
import of labels from a wallet. While transferring access to funds across
wallet applications has been made simple through standards such as BIP39,
wallet labels remain siloed and difficult to extract despite their value,
particularly in a privacy context.

The proposed format is a simple two column CSV file, with the reference to
a transaction, address, input or output in the first column, and the label
in the second column. CSV was chosen for its wide accessibility, especially
to users without specific technical expertise. Similarly, the CSV file may
be compressed using the ZIP format, and optionally encrypted using AES.

The full text of the BIP can be found at
https://github.com/craigraw/bips/blob/master/bip-wallet-labels.mediawiki
and also copied below.

Feedback is appreciated.

Thanks,
Craig Raw

---

<pre>
  BIP: wallet-labels
  Layer: Applications
  Title: Wallet Labels Export Format
  Author: Craig Raw <craig@sparrowwallet•com>
  Comments-Summary: No comments yet.
  Comments-URI:
https://github.com/bitcoin/bips/wiki/Comments:BIP-wallet-labels
  Status: Draft
  Type: Informational
  Created: 2022-08-23
  License: BSD-2-Clause
</pre>

==Abstract==

This document specifies a format for the export of labels that may be
attached to the transactions, addresses, input and outputs in a wallet.

==Copyright==

This BIP is licensed under the BSD 2-clause license.

==Motivation==

The export and import of funds across different Bitcoin wallet applications
is well defined through standards such as BIP39, BIP32, BIP44 etc.
These standards are well supported and allow users to move easily between
different wallets.
There is, however, no defined standard to transfer any labels the user may
have applied to the transactions, addresses, inputs or outputs in their
wallet.
The UTXO model that Bitcoin uses makes these labels particularly valuable
as they may indicate the source of funds, whether received externally or as
a result of change from a prior transaction.
In both cases, care must be taken when spending to avoid undesirable leaks
of private information.
Labels provide valuable guidance in this regard, and have even become
mandatory when spending in several Bitcoin wallets.
Allowing users to export their labels in a standardized way ensures that
they do not experience lock-in to a particular wallet application.
In addition, by using common formats, this BIP seeks to make manual or bulk
management of labels accessible to users without specific technical
expertise.

==Specification==

In order to make the import and export of labels as widely accessible as
possible, this BIP uses the comma separated values (CSV) format, which is
widely supported by consumer, business, and scientific applications.
Although the technical specification of CSV in RFC4180 is not always
followed, the application of the format in this BIP is simple enough that
compatibility should not present a problem.
Moreover, the simplicity and forgiving nature of CSV (over for example
JSON) lends itself well to bulk label editing using spreadsheet and text
editing tools.

A CSV export of labels from a wallet must be a UTF-8 encoded text file,
containing one record per line, with records containing two fields
delimited by a comma.
The fields may be quoted, but this is unnecessary, as the first comma in
the line will always be the delimiter.
The first line in the file is a header, and should be ignored on import.
Thereafter, each line represents a record that refers to a label applied in
the wallet.
The order in which these records appear is not defined.

The first field in the record contains a reference to the transaction,
address, input or output in the wallet.
This is specified as one of the following:
* Transaction ID (<tt>txid</tt>)
* Address
* Input (rendered as <tt>txid<index</tt>)
* Output (rendered as <tt>txid>index</tt> or <tt>txid:index</tt>)

The second field contains the label applied to the reference.
Exporting applications may omit records with no labels or labels of zero
length.
Files exported should use the <tt>.csv</tt> file extension.

In order to reduce file size while retaining wide accessibility, the CSV
file may be compressed using the ZIP file format, using the <tt>.zip</tt>
file extension.
This <tt>.zip</tt> file may optionally be encrypted using either AES-128 or
AES-256 encryption, which is supported by numerous applications including
Winzip and 7-zip.
In order to ensure that weak encryption does not proliferate, importers
following this standard must refuse to import <tt>.zip</tt> files encrypted
with the weaker Zip 2.0 standard.
The textual representation of the wallet's extended public key (as defined
by BIP32, with an <tt>xpub</tt> header) should be used as the password.

==Importing==

When importing, a naive algorithm may simply match against any reference,
but it is possible to disambiguate between transactions, addresses, inputs
and outputs.
For example in the following pseudocode:
<pre>
  if reference length < 64
    Set address label
  else if reference length == 64
    Set transaction label
  else if reference contains '<'
    Set input label
  else
    Set output label
</pre>

Importing applications may truncate labels if necessary.

==Test Vectors==

The following fragment represents a wallet label export:
<pre>
Reference,Label
c3bdad6e7dcd7997e16a5b7b7cf4d8f6079820ff2eedd5fcbb2ad088f767b37b‎,Transaction
1A69TXnEM2ms9fMaY9UuiJ7415X7xZaUSg,Address
c3bdad6e7dcd7997e16a5b7b7cf4d8f6079820ff2eedd5fcbb2ad088f767b37b‎<0,Input
c3bdad6e7dcd7997e16a5b7b7cf4d8f6079820ff2eedd5fcbb2ad088f767b37b‎>0,Output
c3bdad6e7dcd7997e16a5b7b7cf4d8f6079820ff2eedd5fcbb2ad088f767b37b‎:0,Output
(alternative)
</pre>

==Reference Implementation==

TBD

[-- Attachment #2: Type: text/html, Size: 6744 bytes --]

             reply	other threads:[~2022-08-24  9:19 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-24  9:18 Craig Raw [this message]
2022-08-24 13:53 ` Clark Moody
2022-08-25  8:59   ` Craig Raw
2022-08-24 15:57 ` Brandon Black
2022-08-24 19:01 ` rhavar
2022-08-24 20:18   ` Pavol Rusnak
2022-08-25  8:59   ` Craig Raw
2022-08-25 13:48     ` rhavar
2022-08-25 22:54     ` Clark Moody
2022-08-27 22:20       ` Billy Tetrud
2022-08-29 19:52 ` NVK
2022-09-26  8:23 ` Craig Raw
     [not found] <mailman.9.1661342403.3868.bitcoin-dev@lists.linuxfoundation.org>
2022-08-24 19:10 ` Ali Sherief
2022-08-27 21:03   ` Billy Tetrud
2022-08-29 11:25   ` Craig Raw
2022-09-21  6:07     ` Hugo Nguyen
     [not found] <mailman.11604.1661435396.956.bitcoin-dev@lists.linuxfoundation.org>
2022-08-26  6:06 ` Ali Sherief
     [not found] <mailman.12565.1661634459.956.bitcoin-dev@lists.linuxfoundation.org>
2022-08-27 21:26 ` Ali Sherief
     [not found] <mailman.13106.1661772392.956.bitcoin-dev@lists.linuxfoundation.org>
2022-08-29 15:46 ` Ali Sherief
2022-08-29 18:19   ` Christopher Allen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAPR5oBNKQEPCAXcMoneGv2vLVmOLZGyxNEoZ4_=tyQT_mkAkmw@mail.gmail.com' \
    --to=craigraw@gmail$(echo .)com \
    --cc=bitcoin-dev@lists$(echo .)linuxfoundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox