From: Pieter Wuille <bitcoin-dev@wuille•net>
To: Bitcoin dev list <bitcoin-dev@lists•linuxfoundation.org>
Subject: [bitcoin-dev] Overview of anti-covert-channel signing techniques
Date: Tue, 03 Mar 2020 21:35:55 +0000 [thread overview]
Message-ID: <VZTbLR9RlkkyNg6mOOIxedh7H0g8NGlaCmgBfCVXZ4RNfW3axefgoTqZGXjAQZFEuekujVGjRMv8SifDIodZ6tRGaaXQ_R63rFa03SGS6rg=@wuille.net> (raw)
Hi all,
Given the recent activity and attention [1,2] around anti-covert channel
signing schemes, I decided to create this overview of the various techniques
that I know of, their trade-offs, and the various issues they protect against.
Most of this is based on various schemes by a number of authors, and credit
goes to them. I'm putting this together into something hopefully more
comprehensive, but mistakes and omissions in this writeup are likely mine.
I don't believe we have security proofs for any of the schemes, or for any of
the claims I make about the mitigation techniques below. I hope that having
all properties written up in one place makes it easier to eventually get those.
1) Security model
-----------------
When talking about signing with covert channels, we consider 3 parties:
* HW, the hardware wallet (or other offline signing device) with secret data
(a private key, or a seed from which the private key is derived).
* SW, the software wallet (or whatever communicates with HW and the network).
* OO, the outside observer who is trying to learn information about HW's
secret data.
We consider two distinct attack models:
* MSW, "malicious software wallet", but with honest HW. OO and SW are the
same party here, so this models the usual scenarios hardware wallets are
designed for, including side-channel attacks if those are considered to be
part of the threat model.
* MHW, "malicious hardware wallet", but with honest SW and no malicious party
being able to communicate with HW directly. OO and HW may have shared secret
information that SW (or anyone else) is unaware of. SW's job is trying to
prevent HW from using this to leak any information about its secret.
When both the HW and the SW are compromised, clearly no security is possible,
as all entities are controlled by the same party in that case.
In case HW uses a deterministic algorithm, it is possible to protect against
the MHW case by spot checking HW's behavior, by using an externally known
secret/seed. However, we'd like to have better than just spot checking
security, and for protection against side-channel attacks we may want
something that keeps working even when randomness is used by HW.
To keep the scope limited, we assume SW has no secret key of their own. This
rules out solutions like using 2-of-2 MuSig between HW and SW, which work, but
come with their own complications (like needing secure storage for that
secret).
2) Issues and solutions
-----------------------
In this section I will go over the various issues that exist in the MHW and MSW
models, the known mitigation techniques, and the resulting schemes.
I'm assuming a Schnorr-like signature protocol, though everything should apply
equally to ECDSA, and to a lesser extent probably also to multisignature
schemes. These variable names are used:
* H is a hash function.
* G is the curve generator.
* m is the message to be signed, known to and agreed upon by SW and HW.
* d is HW's secret key, with corresponding public key Q=dG.
* k is the secret nonce k, with corresponding public nonce R=kG.
The simplest protocol is naive Schnorr with deterministic nonce generation,
where SW only verifies that a signature created by HW is valid:
[Scheme 1: deterministic nonce, no tweak]
* SW requests a signature by sending (Q,m) to HW.
* HW computes k=H(d,m), R=kG, s=k+H(R,Q,m)d, and sends (R,s) to SW.
* SW verifies sG=R+H(R,Q,m)Q, and publishes sig (R,s) in case of success.
2.a) Predictable k value
There is a simple attack against Scheme 1 that will leak the entire private
key undetectably using a single signature, under MHW. Assume HW and OO both
have access to a shared secret a, unknown to anyone else. HW computes
k=H(a,Q,m) instead, which SW cannot distinguish from the honest k=H(d,m) as it
knows neither a or d. OO can compute k using the same formula, and thus
recover the private key as d=(s-k)/H(R,Q,m).
The general strategy to avoid this is by letting SW provide entropy that is
included into the nonce computation. A very naive (and ineffective) way of
doing that would be:
* SW generates random t, and requests a signature by sending (Q,m,t) to HW.
* HW computes k0=H(d,m,t), R0=k0G, k=k0+t, R=kG, s=k+H(R,Q,m)d, and sends
(R0,R,s) to SW.
* SW verifies sG=R+H(R,Q,m)Q, R=R0+tG, and publishes sig (R,s) if all is good.
This does not help as HW can still choose k directly, and retroactively
compute R0 as R-tG, satsifying SW's requirements. To address that, there are
two options:
* Turning R into a binding commitment to R0 and t (see Scheme 2).
* Only revealing t after HW has revealed their R0 (see Scheme 3).
The first approach is based on making R a commitment to R0 and t using
R=R0+H(R0,t)G. When applied to public keys this is known as pay-to-contract
(and is the basis for Taproot); when applied to the R point in signatures it's
known as sign-to-contract [3]. These are generally useful approaches to make
public keys and signatures commit to/timestamp external data, but using this
to protect against covert channels in signatures was first discussed by Greg
Maxwell [4]:
[Scheme 2: deterministic nonce, S2C tweak]
* SW generates random t, and requests a signature by sending (Q,m,t) to HW.
* HW computes k0=H(d,m,t), R0=k0G, k=k0+H(R0,t), R=kG,
s=k+H(R,Q,m)d, and sends (R0,R,s) to SW.
* SW verifies sG=R+H(R,Q,m)Q, R=R0+H(R0,t)G, and publishes sig (R,s) if all
is good.
The second approach is adding a round, and only revealing the tweak t after HW
has revealed their R0:
[Scheme 3: deterministic nonce, tweak revealed after nonce]
* SW requests a signature by sending (Q,m) to HW.
* HW computes k0=H(d,m), R0=k0G, and sends R0 to SW.
* SW generates a random t, and sends it to HW.
* HW computes k=k0+t, R=kG, s=k+H(R,Q,m)d, and sends (R,s) to SW.
* SW verifies sG=R+H(R,Q,m)Q, R=R0+tG, and publishes (R,s) if all is good.
2.b) Replay attacks
Scheme 3 introduces another problem however, this time under MSW. SW can ask
HW to sign the same message twice, but then pick distinct values for t (t and
t'). The resulting R points will be R=(k0+t)G and R'=(k0+t')G, and the s
values will be s=k0+t+H(R,Q,m)d and s'=k0+t'+H(R',Q,m)d. This allows SW to
compute d=(s'-t'-s+t)/(H(R',Q,m)-H(R,Q,m)). A similar problem would also exist
in Scheme 2 if t wasn't included in the formula for k0.
The problem is that SW is allowed to change their tweak while the nonce
only undergoes a linear function known to SW. There are again two ways to
address this problem:
* Making k0 generation non-repeating by including a counter or randomness
in it (Scheme 4).
* Making SW commit to their tweak before revealing it as well (Scheme 5).
[Scheme 4: counter/random nonce, tweak revealed after nonce]
* SW requests a signature by sending (Q,m) to HW.
* HW uses a global counter c, or fresh randomness b, and computes k0=H(d,m,c)
or k0=H(d,m,b), R0=k0G, and sends R0 to SW.
* SW generates a random t, and sends it to HW.
* HW computes k=k0+t, R=kG, s=k+H(R,Q,m)d, and sends (R,s) to SW.
* SW verifies sG=R+H(R,Q,m)Q, R=R0+tH, and publishes (R,s) if all is good.
A variant of Scheme 4, but with multiplicative tweak rather than additive,
and only revealing H(R0) rather than R0 immediately, was suggested by Sergio
Demian Lerner in [5].
[Scheme 5: deterministic nonce, precommited tweak revealed after nonce]
* SW generates a random t, computes h=H(t), and requests a signature by
sending (Q,m,h) to HW.
* HW computes k0=H(d,m,h), R0=k0G, and sends R0 to SW.
* SW sends t to HW.
* HW verifies h=H(t), and if so, computes k=k0+t, R=kG, s=k+H(R,Q,m)d, and
sends (R,s) to SW.
* SW verifies sG=R+H(R,Q,m)Q, R=R0+tG, and publishes (R,s) if all is good.
Scheme 5 is the one suggested by Stepan Snigirev in [2,6]. A variant with
S2C tweaking instead of additive tweaked was suggested by Andrew Poelstra
in his talk [7], with transcript by Bryan Bishop in [8].
2.c) k0 grinding
So far Schemes 2, 4, and 5 protect against predictable k values and replay
attacks. Predictable k values are however not the only way MWH can leak
secrets.
If we imagine HW has significant computational power, in Scheme 2 it can try
many different k0 values (by deviating from k0=H(d,m,t)), and observe what the
resulting (R,s) signature will be. For example, by iterating on average 256
times, it can choose 8 bits in (R,s) that convey information about k, d, or
whatever seed or master key they are derived from. Using forward error
correction (FEC) schemes, this channel of a few bits per signature may be
enough to leak an entire seed over enough signatures. Using a shared secret a
between HW and OO those bits can again be made undetectable to anyone else.
Schemes 4 and 5 are not vulnerable to this problem, as they force HW to commit
to its R0 before knowing the resulting R. One might think that Scheme 4 merely
shifts this problem to MSW, where SW can grind t to make R biased in a similar
way. We assumed that SW does not have access to any secrets however, so this
is harmless.
2.d) Statefulness
We're left with Schemes 4 and 5 that protect against all listed issues. Both
need two interaction rounds, with state that needs to be kept by HW between
the rounds (the k0 value). While not a problem in theory, this may be hard to
implement safely in simple APIs.
One possibility is sticking with our "best one-round" Scheme 2, and accepting
that that implies the k0 grinding vulnerability.
There is another possibility, namely splitting Scheme 5 into two independent
interactions with HW, where no memory between them is needed on the HW side:
[Scheme 6: deterministic nonce, precommitted tweak revealed separately]
First interaction:
* SW generates a random t, computes h=H(t), and requests the R0 point that HW
would use by sending (Q,m,h) to HW.
* HW computes k0=H(d,m,h), R0=k0G, and sends R0 to SW.
Second interaction:
* SW requests a signature by sending (Q,m,t) to HW
* HW computes k0=H(d,m,H(t)), k=k0+t, R0=R0k, R=kG, s=k+H(R,Q,m)d, and sends
(R0,R,s) to SW.
* SW verifies that R0 matches the earlier R0 it received, and that
sG=R+H(R,Q,m)Q, R=R0+tG, and publishes (R,s) if all is good.
A variant of Scheme 6, with S2C tweaking instead of additive tweaking, is what
is being worked on by Jonas Nick [9] and Marko Bencun [10] for the
libsecp256k1 library.
The same technique cannot be applied to Scheme 4, as HW inherently needs state
to keep the counter c, or to remember the randomness b between interactions
there.
2.e) Failure bias
There is yet another, and even weaker, leak that is available in MHW: whenever
HW learns what the eventual signature (R,s) will be, it could pretend to fail
and go offline, or return some kind of error. In theory, this is enough to
introduce a similar bias, though it would come at possibly enormous failure
rates. If HW is allowed to fail 255 times out of 256, it can introduce an
8-bit bias, and employ similar techniques (FEC and shared HW/OO secret).
The obvious solution is showing a big warning to the user whenever any kind of
failure occurs (including device going offline, or returning invalid
responses) that the device is failing, and that if this happens frequently, it
should be treated as malicious.
Interestingly, Scheme 6 can be adapted to reduce this (already very weak)
channel further. The observation is that HW cannot predict during the first
interaction what (R,s) is going to be, as t is not known. This means it can
only fail during the second interaction when the result is already committed
to. Thus, if failure occurs during the second interaction, SW can simply
retry it with the same t value. If that succeeds, either a glitch occurred and
was safely retried, or the device's attempt to bias was prevented. If the
failure persists, the user should still be warned - as restarting with a
different k would reintroduce the possibility for bias.
2.f) Side-channel attacks
As a last consideration, let's see if these schemes have an impact on
potential resilience against side-channel attacks. I say potential, because
these classes of attacks are in general hard to protect against and model,
as they depend on implementation details and hardware protections. Still,
there are some general observations possible.
A significant amount of time in HW is likely spent on the EC multiplications
to obtain R0 and R from k0 and k. As s=k+H(R,Q,m)d, an variation of the replay
attack is possible here. In schemes with deterministic nonces, SW can ask for
the same signature twice, but use a fault injection to hopefully (only) cause
an error in R, R'. This would reveal (R,s) and (R',s') to SW, where s' is
k+H(R',Q,m)d, which would let them compute d=(s'-s)/(H(R',Q,m)-H(R,q,m)).
There is an easy solution against this, namely verifying the final signature
(R,s) in HW before sending it to SW, as almost certainly the result of such
a fault would not result in a valid signature. This comes at an extra
computational cost, though.
For other side-channel attacks like different power analysis, research [11]
shows that introducing fresh randomness in the right place may be helpful.
This approach is called "synthetic nonces" [12]. Unfortunately usage of these
rules out the deterministic approach from Scheme 6. A variant of Scheme 5
with fresh randomness in the k0 computation can be used, though.
3) Summary
----------
Six different issues of various levels of severity were discussed:
(a) Predictable k: (MHW) a single signature leaks the entire private key.
(b) Replay attacks: (MSW) a single signature leaks the entire private key.
(c) k0 grinding: (MHW) the HW can leak n bits with 2^n work.
(d) Statefulness: HW has to correctly maintain state, complicating things.
(e) Failure bias: (MHW) a selective failure rate of (2^n-1)/2^n can be used
to leak n bits of secret per signature.
(f) Side-channel attacks: (MSW) physical access to HW can help extracting
secrets.
It seems any reasonable solution should at least protect against (a), (b), and
(c), but it seems no solution can be optimal for all of (d), (e), and (f) too.
If statelessness and protection against failure bias are prioritized, Scheme 6
seems best. Its additive tweaking can be replaced with S2C (or multiplicative)
tweaking too. S2C in particular may be desirable to unify with support for
S2C-based timestamping.
If resistance against side-channels is prioritized, solutions with synthetic
nonces seem best; either Scheme 4, or Scheme 5 with randomness added to the
k0 computation. Again, any tweaking approach can be chosen.
If the 2-round approaches for Schemes 4, 5, and 6 are really unacceptable,
Scheme 2 (with S2C tweaking) could be used, but in that case protection
against k0 grinding is reduced to spot checking. If randomness is additionally
added for side-channel resistance, the ability to spot check disappears
entirely.
4) References
-------------
[1] https://lists.linuxfoundation.org/pipermail/bitcoin-dev/2020-February/017649.html
[2] https://lists.linuxfoundation.org/pipermail/bitcoin-dev/2020-February/017655.html
[3] https://blog.eternitywall.com/2018/04/13/sign-to-contract/
[4] https://bitcointalk.org/index.php?topic=893898.msg9861102#msg9861102
[5] https://bitcointalk.org/index.php?topic=893898.msg9841502#msg9841502
[6] https://medium.com/cryptoadvance/hardware-wallets-can-be-hacked-but-this-is-fine-a6156bbd199
[7] https://youtu.be/j9Wvz7zI_Ac?t=640
[8] https://diyhpl.us/wiki/transcripts/sf-bitcoin-meetup/2019-02-04-threshold-signatures-and-accountability/
[9] https://github.com/bitcoin-core/secp256k1/pull/590
[10] https://github.com/bitcoin-core/secp256k1/pull/669
[11] https://eprint.iacr.org/2017/985
[12] https://moderncrypto.org/mail-archive/curves/2017/000925.html
next reply other threads:[~2020-03-03 21:46 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-03 21:35 Pieter Wuille [this message]
2020-03-21 13:34 ` Tim Ruffing
2020-03-21 16:59 ` Russell O'Connor
2020-03-22 9:43 ` Tim Ruffing
2020-03-22 15:30 ` Russell O'Connor
2020-03-22 15:38 ` Tim Ruffing
2020-03-21 20:29 ` Marko Bencun
2020-03-23 14:38 ` Dustin Dettmer
2020-03-24 7:49 ` Tim Ruffing
2020-03-24 14:51 ` Dustin Dettmer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='VZTbLR9RlkkyNg6mOOIxedh7H0g8NGlaCmgBfCVXZ4RNfW3axefgoTqZGXjAQZFEuekujVGjRMv8SifDIodZ6tRGaaXQ_R63rFa03SGS6rg=@wuille.net' \
--to=bitcoin-dev@wuille$(echo .)net \
--cc=bitcoin-dev@lists$(echo .)linuxfoundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox