public inbox for bitcoindev@googlegroups.com
 help / color / mirror / Atom feed
* [bitcoin-dev] OP_CAT Makes Bitcoin Quantum Secure [was CheckSigFromStack for Arithmetic Values]
@ 2021-07-07  5:58 Jeremy
  2021-07-08  8:12 ` ZmnSCPxj
  0 siblings, 1 reply; 6+ messages in thread
From: Jeremy @ 2021-07-07  5:58 UTC (permalink / raw)
  To: Bitcoin development mailing list

[-- Attachment #1: Type: text/plain, Size: 4876 bytes --]

Dear Bitcoin Devs,

As mentioned previously, OP_CAT (or similar operation) can be used to make
Bitcoin "quantum safe" by signing an EC signature. This should work in both
Segwit V0 and Tapscript, although you have to use HASH160 for it to fit in
Segwit V0.

See [my blog](https://rubin.io/blog/2021/07/06/quantum-bitcoin/) for the
specific construction, reproduced below.

Yet another entry to the "OP_CAT can do that too" list.

Best,

Jeremy
-----


I recently published [a blog
post](https://rubin.io/blog/2021/07/02/signing-5-bytes/) about signing up
to a
5 byte value using Bitcoin script arithmetic and Lamport signatures.

By itself, this is neat, but a little limited. What if we could sign longer
messages? If we can sign up to 20 bytes, we could sign a HASH160 digest
which
is most likely quantum safe...

What would it mean if we signed the HASH160 digest of a signature? What the
what? Why would we do that?

Well, as it turns out, even if a quantum computer were able to crack ECDSA,
it
would yield revealing the private key but not the ability to malleate the
content of what was actually signed.  I asked my good friend and
cryptographer
[Madars Virza](https://madars.org/) if my intuition was correct, and he
confirmed that it should be sufficient, but it's definitely worth closer
analysis before relying on this. While the ECDSA signature can be malleated
to a
different, negative form, if the signature is otherwise made immalleable
there
should only be one value the commitment can be opened to.

If we required the ECDSA signature be signed with a quantum proof signature
algorithm, then we'd have a quantum proof Bitcoin! And the 5 byte signing
scheme
we discussed previously is a Lamport signature, which is quantum secure.
Unfortunately, we need at least 20 contiguous bytes... so we need some sort
of
OP\_CAT like operation.

OP\_CAT can't be directly soft forked to Segwit v0 because it modifies the
stack, so instead we'll (for simplicity) also show how to use a new opcode
that
uses verify semantics, OP\_SUBSTRINGEQUALVERIFY that checks a splice of a
string
for equality.

```
... FOR j in 0..=5
    <0>
    ... FOR i in 0..=31
        SWAP hash160 DUP <H(K_j_i_1)> EQUAL IF DROP <2**i> ADD ELSE
<H(K_j_i_0)> EQUALVERIFY ENDIF
    ... END FOR
    TOALTSTACK
... END FOR

DUP HASH160

... IF CAT AVAILABLE
    FROMALTSTACK
    ... FOR j in 0..=5
        FROMALTSTACK
        CAT
    ... END FOR
    EQUALVERIFY
... ELSE SUBSTRINGEQUALVERIFY AVAILABLE
    ... FOR j in 0..=5
        FROMALTSTACK <0+j*4> <4+j*4> SUBSTRINGEQUALVERIFY DROP DROP DROP
    ...  END FOR
    DROP
... END IF

<pk> CHECKSIG
```

That's a long script... but will it fit? We need to verify 20 bytes of
message
each bit takes around 10 bytes script, an average of 3.375 bytes per number
(counting pushes), and two 21 bytes keys = 55.375 bytes of program space
and 21
bytes of witness element per bit.

It fits! `20*8*55.375 = 8860`, which leaves 1140 bytes less than the limit
for
the rest of the logic, which is plenty (around 15-40 bytes required for the
rest
of the logic, leaving 1100 free for custom signature checking). The stack
size
is 160 elements for the hash gadget, 3360 bytes.

This can probably be made a bit more efficient by expanding to a ternary
representation.

```
        SWAP hash160 DUP <H(K_j_i_0)> EQUAL  IF DROP  ELSE <3**i> SWAP DUP
<H(K_j_i_T)> EQUAL IF DROP SUB ELSE <H(K_j_i_1)> EQUALVERIFY ADD  ENDIF
ENDIF
```

This should bring it up to roughly 85 bytes per trit, and there should be
101
trits (`log(2**160)/log(3) == 100.94`), so about 8560 bytes... a bit
cheaper!
But the witness stack is "only" `2121` bytes...

As a homework exercise, maybe someone can prove the optimal choice of radix
for
this protocol... My guess is that base 4 is optimal!

## Taproot?

What about Taproot? As far as I'm aware the commitment scheme (`Q = pG +
hash(pG
|| m)G`) can be securely opened to m even with a quantum computer (finding
`q`
such that `qG = Q` might be trivial, but suppose key path was disabled, then
finding m and p such that the taproot equation holds should be difficult
because
of the hash, but I'd need to certify that claim better).  Therefore this
script can nest inside of a Tapscript path -- Tapscript also does not
impose a
length limit, 32 byte hashes could be used as well.

Further, to make keys reusable, there could be many Lamport keys comitted
inside
a taproot tree so that an address could be used for thousands of times
before
expiring. This could be used as a measure to protect accidental use rather
than
to support it.

Lastly, Schnorr actually has a stronger non-malleability property than
ECDSA,
the signatures will be binding to the approved transaction and once Lamport
signed, even a quantum computer could not steal the funds.






--
@JeremyRubin <https://twitter.com/JeremyRubin>
<https://twitter.com/JeremyRubin>

[-- Attachment #2: Type: text/html, Size: 7288 bytes --]

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2021-07-09 23:25 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-07  5:58 [bitcoin-dev] OP_CAT Makes Bitcoin Quantum Secure [was CheckSigFromStack for Arithmetic Values] Jeremy
2021-07-08  8:12 ` ZmnSCPxj
2021-07-09 19:02   ` Ethan Heilman
2021-07-09 22:38     ` ZmnSCPxj
2021-07-09 23:25       ` Ethan Heilman
2021-07-09 22:52     ` Jeremy

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox