[bitcoin-dev] Draft BIP: OP_TXHASH and OP_CHECKTXHASHVERIFY

From: Steven Roose <steven@roose•io>
To: bitcoin-dev <bitcoin-dev@lists•linuxfoundation.org>
Subject: [bitcoin-dev] Draft BIP: OP_TXHASH and OP_CHECKTXHASHVERIFY
Date: Sat, 30 Sep 2023 12:44:02 +0100	[thread overview]
Message-ID: <e98d76f2-6f2c-9c3a-6a31-bccb34578c31@roose.io> (raw)

[-- Attachment #1.1: Type: text/plain, Size: 6917 bytes --]

Hey all

The idea of TXHASH has been around for a while, but AFAIK it was never 
formalized. After conversations with Russell, I worked on a 
specification and have been gathering some feedback in the last several 
weeks.

I think the draft is in a state where it's ready for wider feedback and 
at the same time I'm curious about the sentiment in the community about 
this idea.

The full BIP text can be found in the attachment as well as at the 
following link:
https://github.com/bitcoin/bips/pull/1500

I will summarize here in this writing.

*What does the BIP specify?*

  * The concept of a TxFieldSelector, a serialized data structure for
    selecting data inside a transaction.
      o The following global fields are available:
          + version
          + locktime
          + number of inputs
          + number of outputs
          + current input index
          + current input control block
      o For each input, the following fields are available:
          + previous outpoint
          + sequence
          + scriptSig
          + scriptPubkey of spending UTXO
          + value of spending UTXO
          + taproot annex
      o For each output, the following fields are available:
          + scriptPubkey
          + value
      o There is support for selecting inputs and outputs as follows:
          + all in/outputs
          + a single in/output at the same index as the input being executed
          + any number of leading in/outputs up to 2^14 - 1 (16,383)
          + up to 64 individually selected in/outputs (up to 2^16 or 65,536)
      o The empty byte string is supported and functions as a default
        value which commits to everything except the previous outpoints
        and the scriptPubkeys of the spending UTXOs.

  * An opcode OP_TXHASH, enabled only in tapscript, that takes a
    serialized TxFieldSelector from the stack and pushes on the stack a
    hash committing to all the data selected.

  * An opcode OP_CHECKTXHASHVERIFY, enabled in all script contexts, that
    expects a single item on the stack, interpreted as a 32-byte hash
    value concatenated with (at the end) a serialized TxFieldSelector.
    Execution fails is the hash value in the data push doesn't equal the
    calculated hash value based on the TxFieldSelector.

  * A consideration for resource usage trying to address concerns around
    quadratic hashing. A potential caching strategy is outlined so that
    users can't trigger excessive hashing.
      o Individual selection is limited to 64 items.
      o Selecting "all" in/outputs can mostly use the same caches as
        sighash calculations.
      o For prefix hashing, intermediate SHA256 contexts can be stored
        every N items so that at most N-1 items have to be hashed when
        called repeatedly.
      o In non-tapscript contexts, at least 32 witness bytes are
        required and because (given the lack of OP_CAT) subsequent calls
        can only re-enforce the same TxFieldSelector, no additional
        limitations are put in place.
      o In tapscript, because OP_TXHASH doesn't require 32 witness bytes
        and because of a potential addition of operations like OP_CAT,
        the validation budget is decreased by 10 for every OP_TXHASH or
        OP_CHECKTXHASHVERIFY operation.

*What does this achieve?*

  * Since the default TxFieldSelector is functionally equivalent to
    OP_CHECKTEMPLATEVERIFY, with no extra bytes required, this proposal
    is a strict upgrade of BIP-119.

  * The flexibility of selecting transaction fields and in/output
    (ranges), makes this construction way more useful
      o when designing protocols where users want to be able to add fees
        to their transactions without breaking a transaction chain;
      o when designing protocols where users construct transactions
        together, each providing some of their own in- and outputs and
        wanting to enforce conditions only on these in/outputs.

  * OP_TXHASH, together with OP_CHECKSIGFROMSTACK (and maybe OP_CAT*)
    could be used as a replacement for almost arbitrarily complex
    sighash constructions, like SIGHASH_ANYPREVOUT.

  * Apart from being able to enforce specific fields in the transaction
    to have a pre-specified value, equality can also be enforced, which
    can f.e. replace the desire for opcodes like OP_IN_OUT_VALUE.*

  * The same TxFieldSelector construction would function equally well
    with a hypothetical OP_TX opcode that directly pushes the selected
    fields on the stack to enable direct introspection.

*What are still open questions?*

  * Does the proposal sufficiently address concerns around resource
    usage and quadratic hashing?

  * *: Miraculously, once we came up with all possible fields that we
    might consider interesting, we filled exactly 16 spots. There is
    however one thing that I would have liked to be optionally available
    and I am unsure of which side to take in the proposal. This is
    including the TxFieldSelector as part of the hash. Doing so no
    longer makes the hash only represent the value being hashed, but
    also the field selector that was used; this would no longer make it
    possible to proof equality of fields. If a txhash as specified here
    would ever be used as a signature hash, it would definitely have to
    be included, but this could be done after the fact if OP_CAT was
    available. For signature hashes, the hash should ideally be somehow
    tagged, so we might need OP_CAT, or OP_CATSHA256 or something anyway.

      * A solution could be to take an additional bit from each of the
        two "in/output selector" bytes, and assign to this bit "commit
        to total number of in/outputs" (instead of having 2 bits for
        this in the first byte).
          o This would free up 2 bits in the first byte, one of which
            could be used for including the TxFieldSelector in the hash
            and the other one could be left free (OP_SUCCESS) to
            potentially revisit later-on.
          o This would limit the number of selectable leading in/outputs
            to 8,191 and the number of individually selectable
            in/outputs to 32, both of which seem reasonable or maybe
            even more desirable from a resource usage perspective.

  * General feedback of how people feel towards a proposal like this,
    which could either be implemented in a softfork as is, like BIP-119
    or be combined in a single softfork with OP_CHECKSIGFROMSTACK and
    perhaps OP_CAT, OP_TWEAKADD and/or a hypothetical OP_TX.

This work is just an attempt to make some of the ideas that have been 
floating around into a concrete proposal. If there is community 
interest, I would be willing to spend time to adequately formalize this 
BIP and to work on an implementation for Bitcoin Core.

Looking forward to your thoughts

Steven

[-- Attachment #1.2: Type: text/html, Size: 8836 bytes --]

[-- Attachment #2: bip-txhash.mediawiki --]
[-- Type: text/html, Size: 10204 bytes --]